- DL manuals
- Qualcut
- Brush Cutter
- 3300ST
- Operating Instructions Manual
Qualcut 3300ST Operating Instructions Manual
Summary of 3300ST
Page 1
Power products llc. Garden master series operating instructions 3300s t brush cu t t e r 33cc 3300st brushcutter.
Page 2: 3300St
Power products llc. 3300st contents description of symbols......................................................................................1 machine specifications .....................................................................................1 unpacking......................................
Page 3: 3300St
! + power products llc. 3300st unpacking due to modern mass production techniques, it is unlikely that your qualcut brushcutter is faulty or that a part is missing. If you find anything wrong, do not operate the tool until the parts have been replaced or the fault has been rectified. Failure to do s...
Page 4: 3300St
Power products llc. 3300st 2. 1. Left handle 2. Right handle 3. Throttle lever 4. Lock off lever 5. Engine switch 6. Safety guard 7. Blade 8. Nylon cutter 9. Safe guard bracket 10. Fuel mixing bottle 11. Inner flange 12. Outer flange 3300st brushcutter parts diagram 13. Shield 14. Nut 15. Sparkplug ...
Page 5: 3300St
! ! Power products llc. 3300st 3. Applications use this product for the following domestic / household applications: • cutting grass, weeds and light undergrowth • edging along path and driveways • cutting pulpy weeds, vines and light brush features drive shaft and protects users from flying debris....
Page 6: 3300St
Power products llc. 3300st safety instructions 4. Save these instructions. 1) work area a) clear the area to be cut before each use. Remove all objects such as rocks, broken glass, nails, wire, string etc. That can be thrown or become entangles in the cutting attachment. B) do not operate power tool...
Page 7: 3300St
Power products llc. 3300st into account the working conditions and the work to be performed. Use of the power tool for operations different from intended could result in a hazardous situation. F) beware of blade thrust . Blade thrust may occur when the spinning blade contacts an object that it does ...
Page 8: 3300St
Power products llc. 3300st protecting your body from vibration the following precautions are strongly recommended, because the minimum exposure, which may trigger the ailment is unknown. 1. Always use the right tool for each job (to do the job more quickly and expose you to less hand-arm vibration)....
Page 9: 3300St
Power products llc. 3300st 7. Thrown debris the trimmer will throw debris in the direction of blade movement at the point of contact. The cutting line head or blade on the qualcut 3300st trimmer rotates anti-clockwise as viewed from the operator’s position, so tilting the cutting line head to the ri...
Page 10: 3300St
Power products llc. 3300st 8. • when using a brush blade to saw through heavy brush and small saplings, saw with the side of the brush blade that is moving toward you and tends to pull the brushcutter away from you. • blades on qualcut brushcutters rotate counterclockwise, as viewed from the operato...
Page 11: 3300St
Power products llc. 3300st 9. • accelerate the engine to maximum speed before starting the cut, and saw through with uniform pressure. • if shrubs or saplings bind the blade, stop the engine, and while supporting the weight of the brushcutter, push the shrub or sapling away to free the blade. Do not...
Page 12: 3300St
! Power products llc. 3300st 10. Warning: please make sure the cutting head has been assembled correctly before use. 1. To fit the nylon cutting head, remove the shield after releasing the nut. Still holding the flange, place the nylon cutting head on the shaft and rotate counterclockwise (h). The n...
Page 13: 3300St
! Power products llc. 3300st filling fuel 11. Warning: move at least 9m away from the refuelling site before starting the engine. Do not smoke while filling the tank. Do not add fuel to the tank close to an open fire or sparks. Never add fuel to the tank in a closed or non-ventilated area. ! Warning...
Page 14: 3300St
Power products llc. 3300st 12. Balancing the brushcutter on the shoulder harness 1. Hang the machine on the harness hook, and see how it balances. 2. Adjust the shoulder harness, the harness hanger on the frame pipe, and the loop handle or u-type handlebar, so the handle or handlebars are in a comfo...
Page 15: 3300St
! Power products llc. 3300st 13. To start a warm engine follow these steps to start a warm engine: 1. Lay the product on a flat, bare surface. 2. Slide the switch to the on position. 3. Push the primer bulb up to eight times. 4. Pull the starter cord. Note: if the product does not start, repeat the ...
Page 16: 3300St
! Power products llc. 3300st 14. Stopping the engine 1. Cool the engine by allowing it to run at idle for 2-3 minutes. 2. Slide the on/off switch to the off position. Operating the brushcutter follow these steps to operate the brushcutter: 1. Remove blade guard from the blade. 2. Start the brushcutt...
Page 17: 3300St
! Power products llc. 3300st 15. The qualcut 3300st uses the following sparkplugs: ngk ld l8rtf torch bm6a champion cj8 replacing the sparkplug note: before removing the spark plug, thoroughly clean the spark plug and cylinder head area. Follow these steps to replace the spark plug: 1. Ensure the en...
Page 18: 3300St
! Power products llc. 3300st 16. The nylon head warning! Read and understand these operating instructions, as well as the information supplied with your machine, and follow all warnings and safety instructions. Failure to do so can result in serious injury to the operator and/or bystanders. • to adv...
Page 19: 3300St
Power products llc. 3300st 17. Storing the product differs depending on the amount of time it will be in storage. Follow these steps to store the product short term: 1. Clean all foreign material from the product. 2. Store in a well-ventilated place that is inaccessible to children. If you do not in...
Page 20: 3300St
Power products llc. 3300st 18. Troubleshooting.
Page 21: 3300St
Power products llc. 3300st 19. 5. What is not covered under this warranty: a. Implied warranties, including those of merchantability and fitness for a particular purpose are limited in duration to this express warranty. After this period, all risks of loss, from whatever reason, shall be on the purc...
Page 22: 3300St
Power products llc. 3300st 20..
Page 23: 3300St
Power products llc. 3300st 21..
Page 24: 3300S
Congratulations on your new qualcut product. We are proud to have you as our customer and will strive to provide you with the best service and reliability in the industry. This product is backed by our extensive warranty and world-wide service network. Euroquip, 109 bolt road, stoke, nelson, new zea...