Qualcut 3300ST Operating Instructions Manual - 3300St
!
+
POWER PRODUCTS LLC.
3300ST
UNPACKING
Due to modern mass production techniques, it is unlikely
that your Qualcut Brushcutter is faulty or that a part is
missing. If you find anything wrong, do not operate the
tool until the parts have been replaced or the fault has
been rectified. Failure to do so could result in serious
personal injury.
The packaging material is made of recyclable materials.
Please dipose of packaging materials in accordance with
regulations.
CARTON CONTENTS
The Qualcut Brushcutter is supplied with the following
accessories as standard.
• 33CC
Engine
• Straight
Shaft
• Grass Deflector Guard
• Fuel Mixing Bottle
• Bull-bar
Handles
• Bump Feed Nylon Spool
• Brush Cutter Blade
• Shoulder
Strap
• Operating
Manual
1.
DESCRIPTION OF SYMBOLS
The rating plate on your tool may show symbols. These represent
important information about the product or instructions on its use.
Conforms to relevant safety standards.
Wear hearing protection.
Wear eye protection.
Wear head protection.
Read these instructions for use carefully. Failure to
follow operating instructions and safety precautions
can result in serious injury.
Wear safety footwear.
Wear safety gloves.
Wear protective clothing
Warning - Safety alert. Indicates danger, warning or
caution. Attention is required in order to avoid serious
personal injury.
Thrown objects can cause severe injury.
Keep all bystanders, especially children and pets at
least 15m from the operating area.
No naked flame - explosive material.
Extremely hot surface. Do not touch hot muffler,
gear box or cylinder, you may get burned. These
parts get extremely hot from operation and remain
hot for a short time after the unit is turned off.
Fuel inlet (Position: under the fuel tank cap)
On/Off (Position: on the on/off switch)
Setting the on/off switch to OFF stops the engine
immediately.
Do not remove safety guard. Operation without safety
guard can result in serious injury.
Z1085
HOT!
CAUTION!
SPECIFICATIONS
Engine Displacement:
33CC Full Crank
Max. Engine Power:
900W
Engine Type:
Air cooled single cylinder,
two stroke cycle
Fuel Type:
Unleaded petrol
- 2 stroke oil (40:1)
Fuel Tank Capacity:
900ml
Spark Plug:
NGK LD L8RTF TORCH BM6A
CHAMPION CJ8
Weight:
7.0kg
Nylon Line Size:
2.0 - 2.5mm
Sound Power Level:
112dB(A)
Cutting Width:
430mm
Maximum RPM:
9800
Assembly Tools:
• Sparkplug Wrench /
Screwdriver
• Allan Key (x2)
• Spanner
• Backing Plates (x2)
• Screws / Washers