1. DL manuals
  2. Quality Espresso
  3. Coffee Maker
  4. Q10
  5. Instruction Manual

Quality Espresso Q10 Instruction Manual

Summary of Q10

  • Page 1

    Espresso coffee machine manufacturer since 1952 q10 instr u ction man u al before using this grinder, read the user and connection instructions. Q q q 1 1 1 0 0 0 09109100 ver.23-10/2013.

  • Page 2

    1. Safety recommendations 1.1 symbols. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.2 safety recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2. General view 2.1 view . . . . . . . . . . . . . . . . . . . . . . ....

  • Page 3

    1.1 symbols q10 is a fully automatic grinder which grinds coffee beans in programmed instant, pre-grind or manual instant mode. Simply insert the filter holder in the corresponding guide to obtain one or two freshly ground doses of coffee. The grinder's versatility also allows for independently adju...

  • Page 4

    ! ! Install the grinder on a solid base the machine shall only be used by adults. Children do not acknowledge the hazards involved in machine, due to which they should not be in contact with them and should not be allowed to use them. People with reduced physical, sensory or mental capacities, or in...

  • Page 5

    Dddgg 2.1view removable hopper coffee press filter holder guide coffee type identification label single-dose pushbutton double-dose pushbutton coffee grounds tray general view 2. 2.2 touch screen closed hopper open hopper - upon removing the hopper, the security micro disconnects the grinder . Gener...

  • Page 6

    Once unpackaged, place the machine in the chosen place, for which a plug socket with an efficient grounding will be required. Connect the network cable, place coffee in the hopper, open the closing sector and press the general switch located under the grounds tray. The grinder will now be ready to o...

  • Page 7

    Before cleaning, disconnect the general switch located underneath the grounds tray. Clean with a damp cloth. Do not use detergent, abrasive products, alcohol or dissolvent. Use a brush to clean the coffee from hidden areas. The machine cannot be cleaned with a water spray. Internal cleaning cycle 7....

  • Page 8

    Screen symbols programming 8. Main menu 1 4 2 - 3 - back - forward - exit - information - confirm 8.4 - cleaning cycle 4 8.2 - configuration 2 8.1 - counters 1 - 8.4.1 cleaning - 8.3.10 usb / configuration / screensaver - 8.3.4 change password - 8.2.1 adjusting single dose time - 8.2.2 adjusting dou...

  • Page 9

    - shows the number of servings done, the doses remaining until blade change and the servings remaining until cleaning the grinder. We can also zero the partial counters. - 8.2.3 - select between pre-grinding, instant, or manual grinding. Adjusting dose time and operating mode - on this screen, the u...

  • Page 10

    - 8.3.3 - change interval time between the two main screens insert password “ 1234 ” - confirm 8.3 configuration: technical personnel configuring cleaning cycle, blade change and interval between screens language configuration program version increase or reduce by pressing + / - the two main screens...

  • Page 11

    - insert new password - press confirm not available - press to discard - press to confirm 8.3.4 – change password next screen next screen next screen next screen blocked 8.3.5 – block user dose adjustment 8.3.6 – load factory settings 8.3.7 – zero total counter 25 ¿revert to factory default settings...

  • Page 12

    With this menu option, users can activate an intensive verification in the grinder. This test consists on continuously opening each of the traps of the coffee channels every 5 seconds, with the traps closed, grinding coffee for 1 second. This option checks all mobile and visible elements of the grin...

  • Page 13

    - configuration - screensaver pictures - confirm - move data from usb to q10 - move data from q10 to usb - the q10 has been fitted with a usb port, with which users can copy the grinder's configuration data to a usb memory stick and then upload this data onto other grinders. We can also change eithe...

  • Page 14

    - the q10 grinder has two images as main screens. These two images alternate every 10 seconds. They are identified with the following file names: q10_1.Bmp and q10_2.Bmp . - q10_1.Bmp : this image provides no additional information. - q10_2.Bmp : at the bottom left of the image there is a bar that i...

  • Page 15

    Data saved to q10_rd.Cfg setting saves does not save confi g ura tio n 1 coffee dose time 2 coffees dose time conf.: pre-grinding/instant/man. Grinding language no. Of coffees until cleaning no. Of coffees until blade change interval between screensavers change password block dose timer for 1 and 2 ...

  • Page 16

    All components of the machine are guaranteed for 12 months (from installation) against any defect that affects correct operation. The guarantee exclusively covers replacement of parts with manufacturing defects. Under no circumstances does it imply complete replacement of the machine. This guarantee...