Quality Espresso Q10 Instruction Manual - page 3
1.1 Symbols
Q10 is a fully automatic grinder which grinds coffee beans in programmed instant, pre-grind or manual
instant mode. Simply insert the filter holder in the corresponding guide to obtain one or two freshly ground
doses of coffee. The grinder's versatility also allows for independently adjusting the amount of coffees we
require for serving one or two coffee, accessing the corresponding menu using the touch screen.
1.2 Safety recommendations
This machine should only be installed by authorised technical personnel. The manufacturer declines all
responsibility for any damage caused due to inadequate installation.
We recommend the machine is installed in a spacious area, free from airstreams and on a solid base.
Avoid installing it on a damp or hot surface.
Check that the voltage, frequency and power characteristics of the electric connection coincide with
those described on the machine's characteristics plate. The characteristics plate can be found below the
hopper.
The machine must be installed according to the country's current electric regulation. You must ensure
the electric installation has a reliable earthed connection, according to the aforementioned standards.
The company declines all responsibility for any possible damage caused by a faulty installation or earth
connection.
Do not use extension cables or multiple adaptors of any type to connect the machine to the power
supply. The power supply cable should never be wound up, it should be as straight as possible in order
to avoid it from overheating.
All internal handling of the machine, except for operations specifically described in this manual
related to cleaning processes, must be carried out by authorised technical personnel.
Preventive cleaning and maintenance tasks must be performed within the intervals indicated by the
machine or the technical service.
The manufacturer declines all responsibility for any possible damage caused to the machine due to a
failure to comply with these obligations, as well as those due to incorrect or inappropriate use.
All of the machine's components, including the connection cable, must be replaced with original spare
parts, which can be supplied by the authorised technical service or the manufacturer.
Before performing any maintenance operation, ensure the machine is disconnected from the electric
power supply by using the installation's general switch or disconnecting the power supply cable.
Safety recommendations
1.
Installation
Location
Electric
connection
WARNING
This may cause injury.
INFORMATION
Important or useful information.
!
i
ELECTRICAL HAZARD DANGER
This may cause injury.
Handling
17
GB