QUAN SHENG TG-007 User Manual - page 28
FUNCTION OPERATION AND DESCRIPTION
FUNCTION OPERATION AND DESCRIPTION
FUNCTION OPERATION AND DESCRIPTION(The following description is without
voice prompt.)
FUNCTION OPERATION AND DESCRIPTION(The following description is without
voice prompt.)
ALL-Menu and channel initialization
Manually Lock the Keypads
1. Press key “#” for more than 2s, the radio will be locked and the LCD displays:
2. Press key “#” for more than 2s to unlock.
This function can lock the keypads.
40
RESET
SURE?
1. In frequency or channel mode, press Menu+40, the LCD displays:
2. Press key Menu, and then press key ▲ or ▼ to choose VFO, and then press key Menu
again,the LCD displays:
3. Press key Menu, the LCD displays:
4. Press key Menu to confirm and return to standby automatically.
VFO-Menu initialization
41
RESET
VFO
41
RESET
SOURE
?
41
RESET
WATT
RESET
ALL
40
1. In frequency or channel mode, press Menu+40, the LCD displays:
2. Press key Menu, and then press key ▲ or ▼ to choose ALL, and then press key Menu
again,the LCD displays:
3. Press key Menu, the LCD displays:
4. Press key Menu to confirm and return to standby automatically.
RESET
ALL
40
40
RESET
SOURE
?
40
RESET
WATT
400.875
136.225
!
NOTE
When listening to the radio, the frequency or channel of A/B receiveing signal will automatically
switch to the frequency or channel state for nornal transimiting and receiving. And it will
automatically switch to FM state when signal disappears.
⊙
FM Radio(FM)
You can listen to the radio frequency, the frequency range is from 65-108MHz.
1. In frequency or channel mode,tap call key, the LCD displays:
2. Press key ▲ or ▼ to adjust radio frequency manually or input known radio frequency.
Example:100.7MHz Input number 1, 0, 0, 7, 0, 0 directly.
88.9MHz Input number 8, 8, 9, 0, 0 directly.
3. Repeatedly press“*”key can be automatically adjusted to the radio station.
4. Tap call key to exit FM radio.
The operation steps are as follows:
FM
100.700
ALARM
136
.
275
Rapid Alert(ALARM)
In frequency or channel mode, press CALL key for more than 2s for rapid alarm, the LCD
displays: Press key PTT to cancel.
!
NOTE
Alarm mode see Menu No.32.
⊙
ALARM
136
.
275
45
46