Quantum Composers Sapphire 9200 Series Operating Manual - Ieee 488.2 Common Commands
of
45
9200 Manual Version 1.2 | Quantum Composers
Page 37
IEEE 488.2 Common Commands
Command:
Parameter Range:
Notes:
*IDN
?
Query only. Returns model, serial number, firmware version, and FPGA
version numbers.
*RCL
0 - 6
Recalls configuration from specified storage location
*RST
RESET. Resets parameters, same as *RCL 0
*SAV
1 - 6
Saves current parameters to desired storage location
*SER
?
Serial number query.
*TRG
Creates a soft trigger input.
*ARM
Resets all channel counters simultaneously when the channels are in either
single shot or burst mode.
*Note: The system must be in continuous mode (this command is functionally
the same as pressing the Run/Stop button).