Quantum Composers Sapphire 9200 Series Operating Manual - page 42
of
45
Page 42 9200 Manual Version 1.2 | Quantum Composers
A message will appear indicating when connect wirelessly to the 9200.
When using any command terminal, be sure to set and/or confirm the baud rate is
115200 bps.
One may now use the 9200 Application (see “9200 Application or any generic
communication terminal program to begin wireless communications.
o It should be noted that the 9200 Application automatically detects the port which
the device is on. When using a generic communication terminal program, be sure
to select the correct Com port in which the device was installed on.