Quantum Pro QE1200.2 Instruction Manual

Summary of QE1200.2

  • Page 1

    Instruction manual • installation instructions / owners manual • due to continuous improvement of the product the specifications are subject to change without notice. Db research l.L.P. 302 hanmore industrial parkway // harlingen, tx 78550 ph: 877.787.0101 // fx: 956.421.4513 // www.Quantumaudio.Net...

  • Page 2

    I ntroduction k eep your sales receipt r ecommendation important! Before making any connections, disconnect the car’s battery until the installation is completed to avoid possible damage to the electrical system. Warning! Exposure to high power sound system can cause hearing loss or damage. Listenin...

  • Page 3

    F eatures and benefits dc offset protection this circuit protects the output of the amplifier against dc voltage. If for some reason dc voltage is detected at the output stage, the amplifier will shut down protecting the speakers from direct current. Short circuit protection the circuit protects the...

  • Page 4

    5 6 m ounting location before you start the installation, it will be necessary to find a mounting location for the ampli- fier. Find a location in which the amplifier will receive adequate ventilation in order to dissipate the heat it develops during operation. Two popular mounting locations are in ...

  • Page 5

    Speaker q link bridged mode master slave speaker output fuse gnd rem +12v power input quantum audio 7 8 s ignal connections connect the rca output of the head unit (am/fm cassette player, cd, or dat) to the rca input terminals of the amplifier. To make these connections, we recommend high quality rc...

  • Page 6

    Speaker output left bridged right power protect quantum audio gnd rem fuse +12v power input speaker output left bridged right power protect quantum audio gnd rem fuse +12v power input 9 10 s peaker connections (qe1200.2, qe2000.4, qe2400.4) make the speaker connections using speaker wire that is at ...

  • Page 7

    11 12 a djustments and settings the quantum amplifiers are equipped with built-in variable crossover networks allowing you to select the crossover mode (i.E. Low-pass/full/high-pass or on/off) and the desired crossover point. For example if you wish to drive a pair of subwoofers, you can select the ...

  • Page 8

    13 14 t rouble shooting the system we have put together this trouble-shooting guide if you experience problems after installing the amplifier. Please keep in mind that the majority of problems incurred are caused by improper installation and not the equipment itself. In addition, there are many comp...