Quantum Pro QE1200.2 Instruction Manual - page 5
SPEAKER
Q Link
BRIDGED MODE
Master
Slave
SPEAKER OUTPUT
FUSE
GND
REM
+12V
POWER
INPUT
QUANTUM AUDIO
7
8
S
IGNAL CONNECTIONS
Connect the RCA output of the head unit (AM/FM cassette player, CD, or
DAT) to the RCA input terminals of the amplifier.
To make these connections, we recommend high quality RCA cables, which are available
at your local car audio retailer. Run signal wires away from electrical wires to avoid possibil-
ity of induced noise from the car’s electrical system (i.e. popping noises or engine noise).
S
PEAKER CONNECTIONS
IMPORTANT! The following speaker connection are for the amplifier in normal mono
configuration.
Make the speaker connections using speaker wire that is at least 16 gauge or heavier.
As with any audio component, proper phasing of the amplifier and speakers is essential
for strong bass response. When connecting, make sure that positive (+) from the amplifier
is connected to the positive (+) of the speaker, and the same for negative (-).
Please note that although the QE1600.1M, QE2400.1D are mono amplifiers, we have
provided two sets of speaker terminals on the amplifier. These terminals are connected in
paralleled internally (connected together). The second set of speaker terminals are
intended for ease of connection when running multiple woofers.
B
C
(QE1600.1M, QE2400.1D)
QE1600.1M – 2 ohm stable
QE2400.1D –1 ohm stable
L
B
C
MU TIPLE SU WOOFER ONNECTION
SINGLE SU WOOFER ONNECTION
L
R
L
R
**CAUTION! Amplifier must see proper load or higher. Any lower than recommended
load will cause the amplifier to overheat and possibly cause permanent damage to
the amplifier!
HPF
HPF
LPF
HIGH IN
L
R
HIGH IN
L
R
X-OVER
X-OVER
BASS EQ
INPUT
GAIN
LPF
HPF
12 6 0
Full
HPF
Full
120Hz
MIN
CH3&4
CH1&2
CH4
CH2
CH3
CH1
MAX
GAIN
MIN
MAX
50Hz
250Hz
3kHz
120Hz
3kHz
QE2400.4
2400 Watt 4 Channel Amplifier
Protect
Power
SPEAKER
Q Link
BRIDGED MODE
Master
Slave
SPEAKER OUTPUT
FUSE
GND
REM
+12V
POWER
INPUT
QUANTUM AUDIO
SIGNAL CONNECTION:
2 CHANNEL AMP
SIGNAL CONNECTION:
4 CHANNEL AMP