Quantum Q SM 150 Operating Manual - Quantum
©
2004
GB
Page 14
Bench grinder
QSM
Version 1.1
29 June 2005
Assembly
quantum
M A S C H I N E N - G E R M A N Y
3
Assembly
INFORMATION
Before the machine is first used the transparent spark-guards and the supports for tools must be
fitted on the bench grinder.
(
Illustr.1-1: “Transparent spark-guard“ on page 8)
Take into account the following maximum distances:
•
Transparent spark-guard and grinding wheel: max. 2mm
•
Tool support and grinding wheel: max. 2mm
WARNING!
Adjust the protective cover when the grinding wheel is worn down.
The operating aperture in the protective covers should not exceed the space required for
machining the parts.
3.1
Parts list
Check the bench grinder immediately on delivery for transportation damage or missing compo-
nents. Remove all separate parts from the cardboard box and check them against the following
list.
•
Bench grinder
•
2 supports for workpieces
•
2 transparent spark-guards
•
Operating manual
3.2
Storage
NOTICE!
Inappropriate storage could damage or ruin important machine components.
Store the packed or already unpacked components only when the specified ambient con-
ditions are observed:
“Ambient Conditions“ on page 13
Request information from Optimum Maschinen GmbH if the bench grinder and auxiliary units
are to be stored for a period longer than 3 months under ambient conditions other than those
specified.
3.3
Installation and assembly
3.3.1
Requirements of installation site
Organise the work area so that the bench grinder can function in accordance with the safety pre-
cautions.
The operating area for operation, maintenance and repair must not be obstructed.
INFORMATION
Access to the bench grinder’s power plug must be kept free.