Quantum Q SM 150 Operating Manual - Quantum
©
200
4
GB
Page 25
29 June 2005
Version 1.1
QSM
Bench grinder
quantum
M A S C H I N E N - G E R M A N Y
6.5
EC Declaration of Conformity
The manufacturer /
retailer:
Optimum Maschinen Germany
Dr.-Robert-Pfleger-Str. 26
D-96103 Hallstadt
hereby declares that the following product
Type of machine:
Bench grinder
Name of machine:
QSM 150
QSM 175
QSM 200
Relevant EU directives:
Machinery directive
98/37/EC, Annex II A
EEC directive
89/336/EC
Low voltage directive
73/23/EC
meets the provisions of the aforementioned directive, including any amendments valid at the time of this
statement.
In order to ensure conformity, the following harmonised standards in particular have been applied:
EN 60034-1: 09/2000
Rotating electrical machines - Part 1: Ratings and operating
characteristics.
EN 60034-9: 06/1998
Rotating electrical machines - Part 9: Noise limits.
EN 60204-1:11/1998
Safety of machinery - Electrical equipment of machines -
Part 1: General requirements.
EN 50081-2:03/1994
Electromagnetic Compatibility -Generic Emission Standard -
Part 2: Industrial environments.
EN 60034-14:09/1997
Rotating Electrical Machines - Part 14: Mechanical vibration
of certain machines with shaft heights 56 mm and higher -
Measurement, evaluation and limits of vibration.
DIN EN 60034-12:01/1996
Rotating electrical machines - Part 12: Starting performance
of single-speed three-phase cage induction motors for volt-
ages up to and including 690 V, 50 Hz
DIN EN 61000-3-3: 03/1996
Electromagnetic compatibility (EMV) - Part 3-3: Limit values
- Limit value regarding power fluctuations and interruptions
in the power supply network for equipment with an input cur-
rent up to and including 16 A.
Hallstadt, 01.10.2001
Kilian Stürmer
(Manager)
Thomas Collrep
(Manager)