Quartech 9113-0-0 Product Manual

Summary of 9113-0-0

  • Page 1

    Pm9113-0-0 revision 2 product manual model 9113-0-0 ethernet bridge for ultra 3000 servo quartech corporation 15923 angelo drive macomb township, michigan 48042-4050 phone: (586) 781-0373 fax: (586) 781-0378 www.Quartechcorp.Com pm9113-0-0 revision 2 the product described in this document can have a...

  • Page 2

    Model 9113-0-0 product manual page 1 pm9113-0-0 revision 2 the model 9113 ethernet bridge allows an allen-bradley plc such as the micrologix 1100 to monitor and control an ultra 3000 servo drive over an ethernet connection. The 9113 connects to the ultra 3000 cn3 port using a cable provided with the...

  • Page 3

    Model 9113-0-0 product manual page 2 pm9113-0-0 revision 2 theory of operation the 9113 allows a plc to read and write parameters within the ultra 3000 drive using the message instruction. The parameters in the ultra 3000 are mapped to file/element numbers so the plc accesses the ultra parameters as...

  • Page 4

    Model 9113-0-0 product manual page 3 pm9113-0-0 revision 2 multiple axis: the 9113 provides a bridge to a single drive when an application requires multiple drives to be controlled then each drive will have an associated 9113 with a unique ip address. An ethernet hub or switch will be required to co...

  • Page 5

    Model 9113-0-0 product manual page 4 pm9113-0-0 revision 2 ethernet cables: the 9113 operates with standard ethernet cables available from many sources. The examples below are consistent with the tia/eia 568-b color code standard. Straight through cable crossover cable device to hub / switch device ...

  • Page 6

    Model 9113-0-0 product manual page 5 pm9113-0-0 revision 2 2180 cable - 9113 to ultra 3000 (supplied with 9113) 9 pin male d-type ultra 3000 communication parameters: 38400 baud, 8 data bits, no parity, one stop bit 2181 cable - 9113 to personal computer this cable is required when using serial port...

  • Page 7

    Model 9113-0-0 product manual page 6 pm9113-0-0 revision 2 9113 hardware dip switch: four switches are accessible through an opening at the side of the 9113 as shown in the image above. A switch is off when the lever is pushed toward the front of the 9113. Currently switches one and two are not assi...

  • Page 8

    Model 9113-0-0 product manual page 7 pm9113-0-0 revision 2 led indicators: the five leds indicate the ongoing status of the 9113 during both run and utility mode. During power-up a checksum verification is made on the 9113 firmware. If the verification fails then the three leds on the front will lig...

  • Page 9

    Model 9113-0-0 product manual page 8 pm9113-0-0 revision 2 physical size and mounting: dimensions in inches the 9113 is enclosed in a rugged steel case and provides a spring loaded din rail mounting clip that allows mounting and dismounting without any tools. To mount the 9113 tilt it forward and ho...