Quatech SS-USB-100 User Manual - System Requirements
Other manuals for SS-USB-100:
Specifications
of
5
May/07
MN3000000034
3
System Requirements
z
Windows® 2000/XP/Server 2003/Vista
z
USB 1.1 or higher port
Driver Installation
For Windows® 2000/XP/Server 2003
1.
Don’t plug in SS-USB-100 connector of your computer until
driver installation is complete.
2.
Please insert the driver CD that came with your SS-USB-100 into
your CD-ROM Drive.
3.
At the Windows desktop click Start, then Run.
4.
Type D:\Drivers\USB\SS-USB-100\Setup.exe, then click OK.
(Change D: to match your CD-ROM drive letter)
5.
Follow the on-screen instructions to complete the installation.
6.
Plug the SS-USB-100 into your computer’s USB port.
7.
Open “Device Manager” under System Properties and check if
there is the device you install under “Prolific USB-to-Serial
Comm Port…”.
8.
The SS-USB-100 is now ready to use.