Quatech SS-USB-100 User Manual - For Windows® Vista
May/07
MN3000000034
4
For Windows® Vista
1.
Don’t plug in the SS-USB-100 into the USB connector of your
computer until driver installation is complete.
2.
Please insert the driver CD that came with your SS-USB-100 into
your CD-ROM Drive.
3.
At the Windows desktop click Start, then Run.
4.
Type D:\Drivers\USB\SS-USB-100\Setup.exe, then click OK.
(Change D: to match your CD-ROM drive letter)
5.
Follow the on-screen instructions to complete the installation.
6.
Plug the SS-USB-10 into your computer’s USB port.
7.
Open “Device Manager” under System Properties and you should
see the device listed as “Prolific USB-to-Serial Comm Port …”.
8.
The SS-USB-100 is now ready to use.
Changing COM Port Number
Some serial devices need a special COM port in order to work. If your
serial device works properly, do not change this setting.
1.
From the Device Manager window double click Ports(COM &
LPT), then double click the Prolific USB-to-Serial Comm Port
you want to change.
2.
Click Port Settings tab and click Advanced… button.