Quest Engineering QSR1000 Instructional Manual - Receiver Controls & Opera
RECEIVER CONTROLS & OPERA
TIONS
8
TUNING THE RECEIVER
DISPLAY MESSAGES
The following is an example of all the display messages you may encounter while using your receiver
.
Specific messages are referenced within the section(s) they apply.
SELECT THE AM/FM BAND
1. Push the FM or AM button on the receiver (or the
AM-FM button on the remote) to activate the tuner.
2. When using the remote you must press the AM-
FM button on the remote again to select the FM or
AM band.
TUNING
Press the tuning up arrow button on your remote
button to move up the AM or FM band.
Press the tuning down arrow button on your remote
to move down the AM or FM bancd.
AUTO TUNING
Use the AUTO feature to automatically search for
stations of sufficient strength. Press AUTO on your
receiver or remote to the receiver into AUTO mode.
"AUTO" appears in the display. Press TUNING up
or down button on the receiver to search. The tuner
finds and stops on the next station whose frequency
is strong enough to be received. To continue the
search, press TUNING up or down button again.
STORING ST
ATIONS IN MEMORY
Y
ou can store up to 30 AM and FM stations. These
stations can be stored in random order.