Quickie 2 User Instruction Manual & Warranty - page 10
19
C. MAINTENANCE TIPS
1. Axles and Axle Sleeves
Check axles and axle sleeves every six months to make sure they are tight.
Loose sleeves will damage the axle plate and will affect performance.
2. Tire Air Pressure
Check air pressure in pneumatic tires at least ONCE A WEEK. The wheel
locks will not grip properly if you fail to maintain the air pressure shown on
tire sidewall.
D. CLEANING
1. Paint Finish
a. Clean the paint finish with mild soap at least once a month.
b. Protect the paint with a coat of non-abrasive auto wax every three
months.
2. Axles and Moving Parts
a. Clean around axles and moving parts WEEKLY with a slightly damp
(not wet) cloth.
b. Wipe off or blow away any fluff, dust, or dirt on axles or moving parts.
Note: You do not need to grease or oil the hand-cycle.
3. Upholstery
a. Hand-wash (machine washing may damage fabric).
b. Drip-dry only. DO NOT machine dry as heat will damage fabric.
E. STORAGE TIPS
1. Store your hand-cycle in a clean, dry area. If you fail to do so, parts may
rust or corrode.
2. Before using your hand-cycle, make sure it is in proper working order.
Inspect and service all items on the "Maintenance Chart." (See p. 18)
3. If stored for more than three months, have your hand-cycle inspected by
an authorized Quickie supplier before use.
I X . M A I N T E N A N C E
18
I X . M A I N T E N A N C E
A. INTRODUCTION
1. Proper maintenance will improve performance and extend the useful life
of your hand-cycle.
2. Clean your hand-cycle. regularly. This will help you find loose or worn
parts and make your hand-cycle. easier to use.
3. Repair or replace loose, worn, bent or damaged parts before using this
hand-cycle.
4. To protect your investment, have all major maintenance and repair work
done by your authorized Quickie supplier.
If you fail to heed these warnings your hand-cycle may fail and cause severe
injury to the rider or others.
1. Inspect and maintain this hand-cycle strictly per chart.
2. If you detect a problem, make sure to service or repair the hand-cycle
before use.
3. At least once a year, have a complete inspection, safety check and service
of your hand-cycle made by an authorized Quickie supplier.
s
!
W A R N I N G S !
B. MAINTENANCE CHART
Tire inflation level
Wheel locks
All fasteners for wear and tightness
Armrests
Axle and axle sleeves
Wheels, tires and spokes
Casters
Anti-tip tubes
Frame
Upholstery
Service by Authorized Supplier
CHECK...
Annually
6 Months
3 Months
W
eekly