1. DL manuals
  2. Quiko
  3. Gate Opener
  4. Titano QK-T4000
  5. Use And Maintenance Manual

Quiko Titano QK-T4000 Use And Maintenance Manual

Summary of Titano QK-T4000

  • Page 1

    Quiko ® è un marchio borinato f.Lli snc e-mail: info@quiko.Biz web: www.Quiko.Biz sede legale e stabilimento 1: via chiesa, 59 - 36040 san germano d.B. (vi) - italia tel: +39 0444 868126 fax: +39 0444 868126 stabilimento 2: via seccalegno, 19 - 36040 sossano (vi) - italia tel: +39 0444 785513 fax: +...

  • Page 2

    Technical features pre-installation control before installing the automation, you must check that: - the wheels of the gate are attached to make the gate stable and must be in good condition; - the entire length of the fixed runway must be free of obstacles, straight and clean and have control lever...

  • Page 3

    Materials for installation fig. 1 1. Gear-motor 2. Counterplate 3. M6 iron rack 30x30mm 4. Limit switch cammes positioning of the counterplate fig. 2 2 3 4 1 4.

  • Page 4

    Installation of the gearmotor fig. 3 open the removable cover of the gearmotor. Loosen the four screws and remove the case. Remove the nuts used to fasten the anchoring brackets. Position the gearmotor onto the counterplate. The gearmotor has to be adjusted: - horizontally: along the gearmotor base ...

  • Page 5

    Fig. 5 positioning the limit switch cammes fig. 6 open the gate manually and fasten the limit switch cammes (2) (3) onto the rack..

  • Page 6

    Use of manual unlocking fig.7 release instructions in case of fault or power failure, open the removable door and unlock the pinion gear by turning the pinion gear pin counter clockwise by means of the provided tool. This allows moving the gate manually. Attention: perform locking and lock release o...

  • Page 7

    Typical installation fig. 9 main components 1 - gear motor 2 - closing limit switch camme 3 - opening limit switch camme 4 - photocell 5 - key selector 6 - photocell on posts 7 - photocell post 8 - flashing lamp 9 - aerial for all electrical connections see the control board installation manual.

  • Page 8

    Declaration of compliance (in accordance with the european regulation ue89/392 appendix iia) manufacturer: borinato f.Lli snc hereby declares, under his liability, that the products: qk-t4000 and qk-t6000 gearmotors are in compliance with the essential safety requirements of the regulations: regulat...

  • Page 9

    Il produttore si riserva di apportare modifiche al presente manuale senza preavviso stabilimento 2 via seccalegno, 19 - 36040 sossano (vi) - italia tel: +39 0444 785513 fax: +39 0444 782371 quiko ® è un marchio borinato f.Lli snc e-mail: info@quiko.Biz web: www.Quiko.Biz sede legale e stabilimento 1...