Quiko Titano QK-T4000 Use And Maintenance Manual - page 2
TECHNICAL FEATURES
PRE-INSTALLATION CONTROL
Before installing the automation, you must check that:
-
The wheels of the gate are attached to make the gate stable and must be in good condition;
-
The entire length of the fixed runway must be free of obstacles, straight and clean and have control levers
at the ends;
-
The upper guide, parallel to the rail and lubricated, must allow for a clearance of about 1 mm from the door
Borinato F.lli Snc is liable only for products it manufactures and commercializes. Once automated, the gate
becomes a machine and is therefore subjected to the rules of the “ Machinery Directive”. It is on the installer to
verify its security. WARNING: Borinato F.lli Snc is not liable for any damages to people, animals or things due to
unauthorised modifications, alterations or betterments on its products by third parties.
QK-T4000
QK-T6000
VOLTAGE SUPPLY (VAC)
230/400 Three -phase
POWER ABSORBED (W)
1100
1500
CURRENT ABSORBED (A)
4,5/2,6
6/3,5
OPERATING TEMPERATURE C°
-30/+70
GATE SPEED m/min
10
PROTECTION LEVEL IP
44
WORKING CYCLE %
60
GEARMOTOR WEIGHT kg
58
66
SPEED rpm
1400
REDUCTION RATIO
1/30
MAX. GATE WEIGHT kg
4000
6000