Quilter ES112 Owner's Manual - Specifications
Specifications
Model:
ES112
Speaker:
Celestion Classic Lead 80
12 in. cone, 1.75 in. voice coil, 8 ohms.
Dimensions:
(H x W x D)
18.5 in. x 17.75 in. x 10.5 in.
47 cm x 45.1 cm x 26.7 cm
Weight:
30 lbs. (13.6 Kg)
Note: Power ratings are provided by the loudspeaker manufacturer and are
only a guideline when selecting a suitable speaker. Quilter Labs qualifies our
speaker selections using a lengthy full power test that ensures that the
speaker can stand up to the power output of our amplifiers.
Troubleshooting
Symptom
Action
No sound
•
Ensure that both sides of the cable are fully inserted.
The plugs should “click” into the jacks locking them in
place.
•
You can test the speaker by plugging it into another
amplifier.
•
The speaker cable may be damaged.
•
Open the back by unscrewing all the screws and
check that the cable going to the speaker is
connected and intact.
•
The speaker may be damaged. Contact Quilter Labs
for replacement instructions.
Speaker is overly
distorted and this
sound is different from
the typical amplifier
overdrive tone
•
The speaker cone may be damaged. Contact Quilter
Labs for replacement instructions.
Sound is intermittent or
“scratchy”
•
Ensure that both sides of the cable are fully inserted.
The plugs should “click” into the jacks locking them in
place.
•
The speaker cable may be damaged.
If the speaker is exposed to a liquid spill or excessive moisture, unplug it
immediately and allow to dry thoroughly before using.
Quilter Laboratories, LLC · 1700 Sunflower, Suite A · Costa Mesa, CA 92626
www.quilterlabs.com