Quooker Combi E Installation Manual - page 11
Other manuals for Combi E:
Installation Manual
Manual is about: boiler for supply of water
of
17
1 Tap through
work top
Push the tap through the hole in the
work top.
2 Securing tap
Position the brass fixing plate around
the hoses. Screw the fixing nut onto
the tap thread. Adjust the position of
the tap to ensure that the Quooker
logo is facing the user. When the
handle is in the cold position, it will
be parallel to the edge of the work
top. Tighten the fixing nut with a pipe
wrench, socket wrench or spanner.
3 Fitting to thin
work top
When fitting to a thin work top, use
the white tap support underneath the
brass fixing plate.
1
2
Fitting Fusion tap
B
2
3