Qvis AMB-BL User Manual - page 8
© Copyright Qvis ®. All documentation rights reserved.
2
Supports a maximum of 20 connections.
Adopts the following audio and video transmission protocols: HTTP, TCP,
UDP, MULTICAST, RTP/RTCP, RTSP, etc.
Supports web access.
Network
Management
Allows network camera configuration and management via Ethernet.
Supports device management via web or client-end.
Power
External power adapter DC12V/AC 24V. You can select which power adapter
according to your actual electrical environments. Please note system cannot
support these two types of power supplying at the same time. As a
recommendation, if you wish for your security system to be continue to run
when there is a loss of power or unstable electrical supply coming from the
mains, a UPS system should be installed.
Assistant
Function
Log function
Supports system resource information and running status real-time display.
Day/Night mode auto switch.
Built-in IR light. Supports IR night vision.
Supports picture parameter setup such as electronic shutter and gain setup.
Produce ultra-clear video images under low lighting conditions using 3D-NR
technology.
Backlight compensation: screen auto split allows backlight compensation to
adjust the brightness.
Supports video watermark function to avoid vicious video modification.
The enclosure conforms to the IP66 protection testing. It can withstand a
variety of weather conditions and outdoor environments.
1.3
Specifications
1.3.1 Performance
Please refer to the following sheet for network camera performance specification:
Parameter
AMB-BL
S
yste
m
Main Processor
Ambarella A5S High performance DSP
OS
Embedded LINUX
System
Resources
Supports real-time network, local record, and remote operation at the same
time.
User Interface
Remote operation interface such as WEB & PSS
System Status
Micro SD card status, bit stream statistics, log, and software version.
V
ide
o Par
amet
er
Image Sensor
1/2.8-inch CMOS
Pixel
1920(H) x 1080(V)
Day/Night Mode
Support day/night mode switch and IR-CUT at the same time. (The lens has
built-in IR-CUT mechanical component.).
Auto Aperture
DC drive
Gain Control
Fixed/Auto
White Balance
Manual/Auto
BLC
Off / BLC (default or custom) / WDR (0-100 adjustable) / HLC (0-100
adjustable)
Exposure Mode
Manual/Auto
PAL: It ranges from 1/3 to 1/10000
NTSC: It ranges from 1/4 to 1/10000