Qvis AMB-MB User Manual - page 8
© Copyright Qvis ®. All documentation rights reserved.
2
Warning!
Do not connect these two power supplying sources to the device at the same
time; it may result in device damage!
Please note: system cannot support these two types of power supplying at the same
time. As a recommendation, if you wish for your security system to be continue to run
when there is a loss of power or unstable electrical supply coming from the mains, a
UPS system should be installed.
Assistant
Function
Log function
Supports system resource information and running status real-time display.
Day/Night mode auto switch.
Supports picture parameter setup such as electronic shutter and gain setup.
Supports motion detection.
Backlight compensation: screen auto split allows backlight compensation to
adjust the brightness.
Supports video watermark function to avoid vicious video modification.
Built in IR light to aid with night vision fuction.
Digital WDR (Wide Dynamic Range)
The enclosure conforms to the IP66 protection testing. It can withstand a
variety of weather conditions and outdoor environments.
1.3Specifications
1.3.1 Performance
Please refer to the following sheet for network camera performance specification:
Model
Parameter
AMB-MB3
AMB-MB2
AMB-MB
Syste
m
Main Processor Ambarella A5s high performance DSP
OS
Embedded LINUX
System
Resources
Support real-time network, local record, and remote operation at the
same time.
User Interface
Remote operation interface such as WEB, PSS
System Status
Bit stream statistics, log, and software version.
Vide
o Par
amet
er
Image Sensor
1/3” CMOS
1/2.8" CMOS
1/3 " CMOS
Pixel
2048(H)*1536(V)
1920(H)*1080(V)
1280 (H)*960 (V)
Gain Control
Fixed/Auto
White Balance
Manual/Auto
Exposure Mode
Manual/Auto
PAL: It ranges from 1/4 to 1/10000
NTSC: It ranges from 1/3 to 1/10000
Video
Compression
Standard
H264/ H.264B/MJPEG