- DL manuals
- Qvis
- Security Camera
- EYE-4MP-FG/W
- Installation & Network Connection Manual
Qvis EYE-4MP-FG/W Installation & Network Connection Manual - Appendix 3 Faqs
©
Copyright Qvis
Ⓡ
All software and documentation rights reserved.
3
USER GUIDE CONTENTS - Continued
7.5NetworkSettings
38
7.5.1BasicSettings
38
7.5.2LANSettings
39
7.5.3PPPOESettings
40
7.5.4UPNPSettings
41
7.5.5EmailSettings
42
7.5.6FTPSettings
44
7.5.7DDNSSettings
45
7.5.8VPNSettings
46
7.5.9RTSPSettings
47
7.5.10PublicIPnoticedbyemail
48
7.5.11ConnectSettings
49
7.6StorageSettings
49
7.6.1DeviceSettings
49
7.6.2RecordSettings
51
7.6.3SnapSettings
51
7.7AlarmSettings
53
7.7.1MotionDetection
53
7.7.2SensorDetection
54
7.7.3NetworkDetection
55
7.8COMSettings
57
7.9SystemSettings
58
7.9.1SystemInfo
58
7.9.2SystemTime
59
7.9.3UserManagement
60
7.9.4Upgrade
61
7.9.5PTZUpgrade
61
7.9.6Restore
62
7.9.7Reboot
62
7.9.8SystemLog
63
Appendix 1 Network Interface of IP Camera
64
Appendix 2 Default Network Parameters
64
Appendix 3 FAQs
64
Summary of EYE-4MP-FG/W
Page 1
Installation & network connection guide camera models: eye-4mp-fg/w mb-4mp-fw 4mp ip camera cctv surveillance updated: july 2016.
Page 2: User Guide Contents
© copyright qvis Ⓡ all software and documentation rights reserved. 2 user guide contents introduction 4 important safeguards and warnings 5 1 ip camera information & data 6 1.1 eye-4mp-fgw / eye-4mp-vgw (eyeball dome camera) 6 1.1.1 technical diagram - dimensions 6 1.1.2 specifications 7 1.2mb-4mp-f...
Page 3: Appendix 3 Faqs
© copyright qvis Ⓡ all software and documentation rights reserved. 3 user guide contents - continued 7.5networksettings 38 7.5.1basicsettings 38 7.5.2lansettings 39 7.5.3pppoesettings 40 7.5.4upnpsettings 41 7.5.5emailsettings 42 7.5.6ftpsettings 44 7.5.7ddnssettings 45 7.5.8vpnsettings 46 7.5.9rtsp...
Page 4: Introduction
© copyright qvis Ⓡ all software and documentation rights reserved. 4 introduction thankyouforpurchasingthe qvis 4 mega pixel ip camera themainfeaturesofthiscamerainclude: • up to 4mp high resolution images • full hd 1080p video • dual video streams • 3d digital noise reduction • dc12v & poe • suppor...
Page 5: 1. Electrical Safety
© copyright qvis Ⓡ all software and documentation rights reserved. 5 important safeguards and warnings 1. Electrical safety • allinstallationandoperationhereshouldconformtoyourlocalelectrical safetycodes. • weassumenoliabilityorresponsibilityforallthefiresorelectricalshock causedbyimproperhandlingor...
Page 6
© copyright qvis Ⓡ all software and documentation rights reserved. 6 105.5 77.4 105.5 77.4 75.5 1 ip camera information & data 1.1 eye-4mp-fg/w (eyeball dome camera) 1.1.1 technical diagram - dimensions.
Page 7: 1.1.2 Specifications
© copyright qvis Ⓡ all software and documentation rights reserved. 7 1.1.2 specifications models eye-4mp-fg/w camera image sensor 1/3”progressivescancmossensor minimum illumination 0.05lux(f1.2),0lux(iron) shutter time: auto,1/25~1/10000s lens 3.6mmfixedlens lens mount m12 day & night ircutfilterwit...
Page 8
© copyright qvis Ⓡ all software and documentation rights reserved. 8 1.2 mb-4mp-fw (mini bullet camera) 1.2.1 technical diagram - dimensions 176.00 54.43 29.00 39.00 59.81 62.00
Page 9: 1.2.2
© copyright qvis Ⓡ all software and documentation rights reserved. 9 1.2.2 models mb-4mp-fw camera image sensor 1/3”progressivescancmossensor minimum illumination 0.05lux(f1.2),0lux(iron) shutter time: auto,1/25~1/10000s lens 3.6mmfixedlens lens mount m12 day & night ircutfilterwithautoswitch wdr >8...
Page 10: 2.1.1 Direct Connection
© copyright qvis Ⓡ all software and documentation rights reserved. 10 2 camera to nvr connection instructions 2.1 connecting to a qvis cortex nvr 2.1.1 direct connection theqviscortexnvrhasaplugandplaycamerasetupasoneofitskey features.Connectthecameratooneofthepoeportsontherearofthe nvrandthedevicew...
Page 11: Apart of It.
© copyright qvis Ⓡ all software and documentation rights reserved. 11 4. Onthe‘ipcameras:setup,add,removeandrename’sectionto thenvr,addintheipaddressofthecctv’snetworkintothe‘start ip’field.Changethelastdigitto‘1’.Addthesameipaddressinto the‘endip’fieldbutthistimechangethelastdigitto‘255’.Clickthe ‘...
Page 12
© copyright qvis Ⓡ all software and documentation rights reserved. 12 4. Installthe‘devicesearch’softwaretoolontothepcorlaptop(the softwarewillbeonthe‘resource’discthatcomeswiththecamera). 5. Whenthesoftwaretoolhasbeeninstalled,clickthe‘search’buttonto findthecameraonthenetwork(seepreviouspage). 6. ...
Page 13
© copyright qvis Ⓡ all software and documentation rights reserved. 13 8. Setthecamera’sipaddress,gateway,andsubnetmasktomatch appropriatelanrange,andclick‘ok’toset. 6. Onthe‘ipcameras:setup,add,removeandrename’sectionto thenvr,addintheipaddressofthecctv’snetworkintothe‘start ip’field.Changethelastdi...
Page 14: 2.2.1 Direct Connection
© copyright qvis Ⓡ all software and documentation rights reserved. 14 2.2 connecting to a dahua nvr 2.2.1 direct connection these instructions are for an nvr that has inbuilt poe ports. 1. Connectthecameratothepoeportofthenvr. 2. Thiswillthenassignthecameraanipaddressinthe10.1.1.Xrange, takenoteofth...
Page 15
© copyright qvis Ⓡ all software and documentation rights reserved. 15 2.2.2 connection over lan network (with dhcp server) thefollowingstepswilldescribehowtoconnectthecameratothenvr overalocalareanetwork(lan),viaanexternalpoeswitch. These instructions need to be followed only if you are connecting t...
Page 16: Involved With It.
© copyright qvis Ⓡ all software and documentation rights reserved. 16 5. Openinternetexplorerandenteroneofthecameraipaddressesinto theaddressbar. 6. Loginwithusername:adminpassword:admin 7. Selectconfigonthetopofthewebpage. 8. Selectnetwork. 9. Changethehttpportto81andtheonvifportto80. 10. Savethese...
Page 17
© copyright qvis Ⓡ all software and documentation rights reserved. 17 9. Setthecamera’sipaddress,gateway,andsubnetmasktomatch appropriatelanrange,andclick‘ok’toset. 5. Connectanethernetcablefromapcorlaptoptoanethernetport withinthesamenetwork. 6. Openinternetexplorerandenteroneofthecameraipaddresses...
Page 18
© copyright qvis Ⓡ all software and documentation rights reserved. 18 3 download and install activex youneedtoinstallactivexplugincontrolwhenyouvisittheipcamerafor thefirsttimethroughtheinternetexplorerbrowser. 1. Inputtheipaddressofipcameraintotheinternetexplorer’saddress bartoenterintologinpage(se...
Page 19: Internet Options->
© copyright qvis Ⓡ all software and documentation rights reserved. 19 please note:abnormaloperationaleventsmayoccurwhilstinstalling activexplugin.Followtheseinstructionstoresolvetwoofthemostlikely abnormaloperationalevents: 1:thiswindowmayappearwheninstallingtheactivexplugin(figure3): figure 3 pleas...
Page 20
© copyright qvis Ⓡ all software and documentation rights reserved. 20 a figure 5a figure 5b figure 6.
Page 21
© copyright qvis Ⓡ all software and documentation rights reserved. 21 a 2:thiswindowmayappearwheninstallingtheactivexplugin(figure7): figure7 pleasecloseinternetexplorerandcmssoftware,thenclick“retry”..
Page 22: Login
© copyright qvis Ⓡ all software and documentation rights reserved. 22 4 login reopeninternetexploreraftertheactivexinstallationhasbeencompleted. Inputthecamera’sipaddresstoreturntologinpage,enterusernameand password(defaultsettingis admin/admin)seefigure8,clicklogintoenter intomaininterface: figure ...
Page 23: [Main Stream]:
© copyright qvis Ⓡ all software and documentation rights reserved. 23 intheliveviewinterface,usersareabletoperformoperationssuchas snapshotrecord,videorecording,playback,call,listentoaudio(onlyon certaincameramodels),clearalarm,logsearch,localimagezoom, full-screenviewing,ptz,andlenscontrol. [main s...
Page 24: Replay
© copyright qvis Ⓡ all software and documentation rights reserved. 24 6 replay click‘replay’toenterintothevideoplaybackpage(seefigure10a). Figure 10a userscansearchforrecordedimagefilesorsnappedpictureswithinthe localpcorstoragedeviceaccordingtovideorecorddate(sdcardfeature availableonlyoncertaincam...
Page 25
© copyright qvis Ⓡ all software and documentation rights reserved. 25 [play]:choosetherecordedimageorsnapshotpictureinfilelist,right clickthefileorpictureandclick‘play’buttontoplay.Thecontentswillbe displayedwithinthewindowbelow.Userscanviewthevideo/pictureplay informationandcontroltheprocess(seefig...
Page 26: Set System Parameters
© copyright qvis Ⓡ all software and documentation rights reserved. 26 7 set system parameters 7.1 local config seefigure13toviewthe‘localconfig’systemsettingsinterface: figure 13 [preview mode]: userscanselect,accordingtotheirneeds, ‘realtime’priorityforviewingvideoatthe fullframerateallowed,orthe‘f...
Page 27: 7.2 Audio Setting
© copyright qvis Ⓡ all software and documentation rights reserved. 27 7.2 audio setting see figure 14forthe‘audiosetting’interface(audioonlyavailableon certaincameramodels): figure 14 [enable]: toturnipcamera’saudioonoroff.When thereisnoneedforaudio,un-tickthisboxto savedspandnetworkresources.Audioi...
Page 28: 7.3 Video Settings
© copyright qvis Ⓡ all software and documentation rights reserved. 28 7.3 video settings 7.3.1 osd settings - text overlay seefigure15forthe‘osdsettings’interface. Figure 15 [title]: thenameofvideochannel,whichwillbedisplayedat thebottomleftofthevideoimage(itisalsomovable), maximumcharactersallowed:...
Page 29: 7.3.2 Video Coding
© copyright qvis Ⓡ all software and documentation rights reserved. 29 7.3.2 video coding seefigure16forthe‘videocoding’interface figure 16 [coding level]: onlybaselineandmainprofilesareavailableforthe h.264compressionformat.Baselineissuitablefor lowvideostreamingdelay,andthesituationhave requirement...
Page 30: [Bitrate]:
© copyright qvis Ⓡ all software and documentation rights reserved. 30 [bitrate]: therangeforthepreferredandalternatestreamsis 30~16384kbps.Higherbitratesettingscangenerate betterimagequality,butitoccupiesmorebandwidth, pleaseadjustthesettingaccordingtoyouractualband width. Underthecbrsetting,[bitrat...
Page 31: 7.3.3 Video Mask
© copyright qvis Ⓡ all software and documentation rights reserved. 31 7.3.3 video mask seefigure17toviewthe‘videomask’interface: figure 17 [enable mask]: enableordisablevideomasking. [mask area set]: clickandmovecursortosetimagemaskingarea,an imagecanbeentirelyorpartiallymasked,maximumof 4areassuppo...
Page 32
© copyright qvis Ⓡ all software and documentation rights reserved. 32 figure 18.
Page 33: [Basic]:
© copyright qvis Ⓡ all software and documentation rights reserved. 33 [images color]: adjustthebrightness,contrast,hue,saturation, acutance*,gammaofvideo. - image mode:transparentandtruecolor. [basic]: - mirror: setmirrortohorizontallyrotatethevideo; - flip: setfliptoverticallyrotatethevideo; - lsc:...
Page 34: Ir:
© copyright qvis Ⓡ all software and documentation rights reserved. 34 - ir detection:forthismode,thephoto- resistorwilldetecttheluxvalue.Tosuit differentinfraredlightarrays,wesupport3 kindsofworkingmodes:1(lowlevelmode). 2(highlevelmode).3(autodetectionmode), whenthedeviceispoweredon,camerawill auto...
Page 35: 7.3.5 Picture Parameters
© copyright qvis Ⓡ all software and documentation rights reserved. 35 7.3.5 picture parameters seefigure19forthe‘snappicture’interface: figure 19 [picture format]: supportsonlyjpgformat.Megapixelcameradefinition isthesameaswhatissetin[videodefinition]. [resolution]: settheresolutionyouwantthesnapsho...
Page 36: [Close]:
© copyright qvis Ⓡ all software and documentation rights reserved. 36 [close]: switchesintelligentvideostreamingqualityswitching featureoff. [auto]: setstheintelligentvideoqualityswitchingmodeto automatic.Youwillbeabletosetmotiondetection sensitivitylevelstoeitherlow/normal/high.Video streamingquali...
Page 37: 2.4.2 Smart Detect
© copyright qvis Ⓡ all software and documentation rights reserved. 37 2.4.2 smart detect seefigure21forthe‘smartdetect’interface: figure 21 smart cover detect whenthecameralensisobscuredorcoveredbyanobjectthathasmoved infrontofit,youcansetupthecameratoperformareactionaryoperation. Selectupto3reactio...
Page 38: [Smart Control Switch]:
© copyright qvis Ⓡ all software and documentation rights reserved. 38 7.4.3 smart control - not available for these camera models seefigure22forthe‘smartcontrol’interface: figure 22 [smart control switch]: performspresetmovementsifcamerahas ptzcapabilities . [preset - alarm open]: cameraperforms pre...
Page 39: 7.5.2 Lan Setting
© copyright qvis Ⓡ all software and documentation rights reserved. 39 afteryousettheseparameters,pleaseclick‘save’andthedevicewill reboottomaketheparametersvalid. 7.5.2 lan setting seefigure21forthe‘lansetting’interface: figure 24 [dhcp enable]: ifthedhcpfunctionoftherouterisenabled,theip camerawill...
Page 40: 7.5.3
© copyright qvis Ⓡ all software and documentation rights reserved. 40 note:afterrevisingandsavingparameters,thedevicewillrestart.Ifitis appliedwithinthelan,pleasepayattention-toavoidipaddressconflict. 7.5.3 pppoe settings seefigure25forthe‘pppoesetting’interface: figure 25 [enable]: enableordisablep...
Page 41: 7.5.4
© copyright qvis Ⓡ all software and documentation rights reserved. 41 7.5.4 upnp settings seefigure26forthe“upnpsetting”interface: figure 26 auto-mappingofport;whentheipcameraisconnectedtoarouterwiththe upnpfunctionenabled,therouterwillautomaticallymaptheport,usingthe upnpsettings,tothepublicnetwork...
Page 42: [Data Mapping Status]:
© copyright qvis Ⓡ all software and documentation rights reserved. 42 [data mapping status]: whentheupnpfunctionrunssuccessfully, thestatusbarwillechothedataportmapped totherouterbythedevice. [web mapping status]: whenupnpfunctionrunssuccessfully,the statusbarwillechothewebportmappedto therouterbyth...
Page 43: [Password]:
© copyright qvis Ⓡ all software and documentation rights reserved. 43 [password]: theloginpasswordofthemailboxthatsendsemails. [mail title]: titleofemails. [smtp port]: portnumberofsmtpport.Differentmailservershave differentportnumbers.Forexample,theserverportof gmailis465. [ssl]: tickthisboxtoenabl...
Page 44: 7.5.6
© copyright qvis Ⓡ all software and documentation rights reserved. 44 7.5.6 ftp settings seefigure28forthe“ftpsetting”interface: figure 28 useaspecifiedftpservertosendandstorerecordedvideofilesand snappedimagesgeneratedafteranalarmistriggeredinftpmode. Supportsuptotwoftpservers;whencamerafailstoconn...
Page 45: 7.5.7
© copyright qvis Ⓡ all software and documentation rights reserved. 45 7.5.7 ddns settings seefigure29forthe“ddnssetting”interface: figure 29 tobindthecamerawithafixeddomainnameusingaddnsserver.Using afixeddomainnamewillpreventtheneedtouseanipaddress(thatmay changerepeatedlyovertime)toconnecttothecam...
Page 46: [Data Port Map No.]:
© copyright qvis Ⓡ all software and documentation rights reserved. 46 [data port map no.]: fillintheexternaldataportmappedbythe ipcameraontherouter(thatisconnected topublicwebsite). [web port map no.]: fillintheexternalwebportmappedbytheip cameraontherouter(thatisconnectedto publicwebsite). [update ...
Page 47: 7.5.9
© copyright qvis Ⓡ all software and documentation rights reserved. 47 7.5.9 rtsp settings seefigure31forthe“vpnsetting”interface: figure 31 [enable rtsp]: checkrtspboxtoenablertspfunction, rtspfunctionisenabledasdefault. [enable authentication]: checkencryptionbox(disabledasdefault). Whenenablingenc...
Page 48: 7.5.10
© copyright qvis Ⓡ all software and documentation rights reserved. 48 7.5.10 public ip noticed by email seefigure32forthe“publicipnoticedbyemail”interface: figure 32 [enable email]: checkthisboxtoenablethepublicipmailnotification function. [update interval]: selecttheintervaltimeofpublicipmailnotifi...
Page 49: 7.5.11
© copyright qvis Ⓡ all software and documentation rights reserved. 49 7.5.11 connect settings seefigure33forthe“connectsetting”interface: figure 33 [auto connect]: enableordisableactiveconnectionofthe devicetothesurveillancecenter. [central url]: theaddressofsurveillancecenter(e.G. 192.168.55.99). [...
Page 50: [Storage Device]:
© copyright qvis Ⓡ all software and documentation rights reserved. 50 figure 34 [storage device]: viewsdcardinformationhere,including totalsize,freesizeandstatus.Userscan alsoclickthe[format]buttontoformatsd card.Duringtheformattingprocessplease clickthe[refresh]buttontothedisplay formattingcompleti...
Page 51: 7.6.2
© copyright qvis Ⓡ all software and documentation rights reserved. 51 7.6.2 record settings seefigure35forthe“schedulerecord”interface: figure 35 [schedule record]: setthetimeperiodforscheduledrecording- twoperiodsareallowedonly. [file storage mode]: clickeitherthe‘e-mail’boxor‘ftp’boxto choosewhatm...
Page 52: 7.6.3
© copyright qvis Ⓡ all software and documentation rights reserved. 52 7.6.3 snap settings seefigure36forthe“schedulesnap”interface: figure 36 [snap interval]: setthepicturestillimagecaptureintervaltime, minimumintervalis1second. [schedule snap]: setthestillvideoimagecapturescheduletimes,only twoperi...
Page 53: 7.7
© copyright qvis Ⓡ all software and documentation rights reserved. 53 7.7 alarm settings 7.7.1 motion detection seefigure37forthe“motiondetection”interface: figure 37 userscansetthecameratodetectmotionandsendalarmtriggeractions whenmovementisdetected.Anumberofalarmtriggeroperationscanset, theseinclu...
Page 54: [Io Output]:
© copyright qvis Ⓡ all software and documentation rights reserved. 54 [io output]: enableordisablealarmoutput. [alarm output duration]: setthealarmdurationafterbeingtriggered (inseconds).Thedurationrangeisbetween 0-86400s.0meansthatthereisnolimitfor alarmoutput. [snapshot]: whenalarmistriggered,thep...
Page 55: [Enable]:
© copyright qvis Ⓡ all software and documentation rights reserved. 55 setsensoralarmparametershere:enabledetect,sensortype,detecttime, linkagealarmoutput,linkageoutputduration,e-mailsendingwhenalarm hasbeentriggered,linkagesnapping/recording,etc. [enable]: enableordisablesensoralarmdetection. [senso...
Page 56: [Enable]:
© copyright qvis Ⓡ all software and documentation rights reserved. 56 figure 39 setnetworkfailurealarmparametershere:detectionon/off,linkagealarm, alarmoutputduration,sendinge-mailswhenthealarmhasbeentriggered, linkagesnapping/recording,etc. [enable]: enableordisablenetworkfailurealarm detection. [l...
Page 57: [Audio Out]:
© copyright qvis Ⓡ all software and documentation rights reserved. 57 [audio out]: this feature is not available on these camera models. Aftersettingalltheparameters,click‘save’tomaketheparametersvalid. Attention: recordfilepackettimeequalsthealarmduration,tosetthe recordingtimedurationsee[record]wi...
Page 58: 7.9
© copyright qvis Ⓡ all software and documentation rights reserved. 58 7.9 system settings 7.9.1 system info seefigure41forthe“systeminfo”interface: figure 41 [system]: displaydevicename,vostandard,languagedevice id,version,oryoucandefinethedevicename. [language]: supportschineseandenglish.Afterchang...
Page 59: 7.9.2
© copyright qvis Ⓡ all software and documentation rights reserved. 59 7.9.2 system time seefigure42forthe“systemtime”interface: figure 42 [system time]: supportsthreedifferentmethodstoupdatethedevice’s time. [ntp server]: afterselectingthefunction,selecttimezone,andclick save.Thecamerawillsendtheque...
Page 60: 7.9.3
© copyright qvis Ⓡ all software and documentation rights reserved. 60 7.9.3 user management seefigure43forthe“systemtime”interface: figure 43 youcansetthreeusersforeverycamera,oneisadministrator,theother twoaregeneralusers. Administrator authority:canoperateandsetallfunctionsandparameters ofipcamera...
Page 61: 7.9.4 Upgrade
© copyright qvis Ⓡ all software and documentation rights reserved. 61 7.9.4 upgrade seefigure44forthe“upgrade”interface: figure 44 clickthe“browse”button,andselectcorrectupgradefile(kernelfile, suffix.Uot),click[upgrade],thenyoucanupgradeyoursystem.Theupgrade progressratewillbedisplayedduringthispro...
Page 62: 7.9.6 Restore
© copyright qvis Ⓡ all software and documentation rights reserved. 62 attention: not available on these camera models 7.9.6 restore seefigure46forthe“restore”interface: figure 46 alldeviceparameters(includingnetworkparameters,excludingphysical address)willberecoveredasfactorysettingvalues. 7.9.7 reb...
Page 63: 7.9.8
© copyright qvis Ⓡ all software and documentation rights reserved. 63 7.9.8 system log seefigure48forthe“systemlog”interface: figure 48 [log search]: performsanoperationandalarmlogsearch.The maximumcapacityis512messageentries.Whenthe numberofentriesexceeds512,thesystemwilldelete theearliestrecordsby...
Page 64: Cabled Network:
© copyright qvis Ⓡ all software and documentation rights reserved. 64 appendix 1 network interface of ip camera thedefaultnetworkportsoftheipcamerasare: appendix 2 default network parameters defaultnetworkparameters cabled network: ipaddress:192.168.1.88 dataport:5000 subnetmask:255.255.255.0 webpor...
Page 65: (Without Dhcp Server).
© copyright qvis Ⓡ all software and documentation rights reserved. 65 possible reason 2: camera’sipaddressisbeingusedbyotherdevices solution:disconnecttheipcamerafromthenetwork,connectuptheip cameratopcseparately,andthenresettheipaddressaccordingtothe instructionsfoundwithinthischapter 2.1.3 connect...
Page 66
© copyright qvis Ⓡ all software and documentation rights reserved. 66 figure 49 figure 50 4. Failed to visit ip camera via ie after upgrade solution:delete/clearthebrowser’sdatacache. Steps: openinternetexplorer,click“tools”,select“internetoptions”,click “deletefiles”buttonwithin“internettemporaryfi...
Page 67: Solution:disablethefirewall.
6. Device search software cannot find device possible reason: devicesearchsoftwareadoptsmulticastprotocolto performsearching.Butthefirewallforbidsmulticastdatapacketsthrough. Solution:disablethefirewall. 7. Image processing does not work properly possible reason 1:systemissue,directxfunctionisdisabl...
Page 68: Www.Qvisglobal.Com
Is here 8/16/24chn cortex nvr with built in poe • supports up to 5mp recording • plug & play • 8/16/24 port poe • adc mode (auto detection of ip camera) • supports 2 sata (12tb) • intelligent self maintenance • built in remote servicing • 3 yr warranty • 4 x usb • 1 x hdmi/ 1 x vga • 1.5u case • rac...