Qvis MINI-PTZ-23X-H User Manual - page 20
13
PRESET NO :001
TITLE :PRESET1
SETTING
CALL
BACK EXIT
EXIT
NEXT PAGE: This includes: PRIVACY MASKING, PTZ SPEED, SET ZERO, POWER UP, MENU
PASSWORD, MENU IDEL, PTZ AUTO STOP, and HEATER. Move the cursor to the item and then click
the confirm button to set. .
BACK: Go back to previous menu.
EXIT: Log out system menu.
2.4.4.1 Preset Setup
Move the cursor to PRESET button and then click confirm button to go to set interface.
PRESET NO: Please use left/right key to modify preset number. The different protocols support different
preset values.
TITLE: Title text is the label used for you to identify the camera. System will automatically name a title for
the camera.
SETTING: Please input preset number first and then select the monitor zone. Please move the cursor to
setting and click the confirm button. The system will pop up a message: PRESET: *** Here *** means preset
number. And the SETTING column pops up an OK. Now you successfully added a preset. Please note, you
need to enable display preset title function first (Main menu->display setting->preset title). Repeat the
above procedures to set more presets. When you want to modify a preset, you can input the preset number
you want to modify and then follow the above steps to set the preset.
CALL: This is to recall a preset. Move the cursor to
‘PRESET NO’ and then input a corresponding preset
value. Then move the cursor to CALL and then click confirm button to go to a preset.
BACK: Go back to previous menu.
EXIT: Log out system menu.
For PELCO protocol user, please refer to the following special functions:
Call preset: Call preset 28 or preset 95 to go to dome menu. Call preset 29 or preset 99 to go to scan. Call
preset 24 or preset 81 to go to pattern. Call preset 25 or preset 82 to go to cruise (tour). Call preset 30 or
preset 96 to stop scan or pattern. Call preset 31 or preset 83 to begin rotation. Call preset 33 to enable PTZ
180 degrees rotation. Call preset 34 to set dome position as 0.
Set preset: Set preset 26 or 92 to set scan left limit. Set preset 27 or 93 to set scan right limit. Set preset 22
or 79 to begin recording. Set preset 23 or 80 to stop recording.