R82 SWAN User Manual - √
Manual is about: bathing chair
of
16
A
A
B
C
√
G
B
G
B
GB
GB
HEIGHT
ADJUSTMENT
1) Start by loosening all screws (A). Remove the
screws. Left rear wheel and both front wheels
are to be adjusted to the holes in the internal
rod.
2) Tighten the screws when the desired height
is reached.
3) The right rear wheel is for adjustment and
to avoid rocking. Adjust the fourth leg so the
chair is at the right plane.
SEAT ANGLING
1) Loosen the locking handle (A)
2) Push the spring clip (B), and carefully tilt the
seat unit.
Do not tilt the seat unit further back than
the lower spring clip (C).
3) Tighten the handle (A), when the seat unit is
in the required position
Always make sure you have a grip off the
seatback, before loosening the tightening
handle.
6