RAB Lighting FXLED78 Installation Instructions - Cleaning & Maintenance
FXLED78 INSTALLATION INSTRUCTIONS
FXLED78-IN-1111
CLEANING & MAINTENANCE
CAUTION: Be sure fixture temperature is cool
enough to touch. Do not clean or maintain while
fixture is energized.
1. Clean glass lens with non-abrasive glass cleaning
solution.
2. Do not open the fixture to clean the LED. Do not
touch the LED.
Note: These instructions do not cover all details or variations
in equipment nor do they provide for every possible situation
during installation, operation or maintenance.
Pat Pending
ACCESSORIES
Chrome Wire Guard:
GDFXLED78W
Poly Shield:
GDFXLED78P
Lens & Door Replacement:
LFXLED78 (bronze)
LFXLED78W (white)
GUARD OR SHIELD INSTALLATION
Wire Guard and Poly Shield mount with (4) #8-32
Stainless Steel Screws. Screws are provided with the
accessory. See figure 1 for Guard. See figure 2
for Shield
1. Line up guard or shield with existing pre-drilled holes
in frame as shown, tighten screws.
GUARD & SHIELD INSTALLATION
The Wire Guard and Poly Shield can be mounted on the
same fixture with (4) #8-32 screws as shown below.
Stainless
Steel
Screws
Stainless
Steel
Screws
Figure 1
Figure 2
FXLED78 Cool
FXLED78N Neutral
FXLED78Y Warm