Race Energy BCM21 Installation & User Manual - page 7
7
PACKAGE CONTENTS
The box should contain:
• One BCM21 Motorsports Intelligent Battery Charger,
• One Alligator Clip extension cable,
• This user guilde (a pdf copy can be downloaded from www.raceenergy.net)
• One Warranty Registration Card. Returning this card is not mandatory for
warranty coverage, but will assist us to stay in touch with you for updates
and other news. Warranty registration can also be completed at
www.raceenergy.net
• PowerWizard software can be downloaded from www.raceenergy.net
• If anything is damaged or missing, please contact us immediately at
1-800-668-3884 or by emailing sales@raceenergy.net
INSTALLATION
CONNECTION TO A RACE VEHICLE
1. Place the charger in a convenient location close to the battery connector on the
vehicle.
2. Plug the charger into the vehicle.
3. Check the polarity indicator light (labelled ‘POL’) on the charger front panel. If it
glows RED, the battery connection in the vehicle is reversed. Stop and correct
the connections to the battery (Red should go to Positive and Black should go
to Negative). After correcting any wiring issue, check that the POL indicator
light is OFF.
4. Plug the charger into any source of AC from 85 to 265 VAC.
5. Press the POWER button to turn the charger ON.
Installation Indicators
AC
POL
TEMP
25
DEV
CH
75
FAIL
FLT
LO V
BAT
50
PS
AC Present
AC
POL
TEMP
25
DEV
75
FAIL
FLT
LO V
50
BAT
Battery Polarity Reversed
CH
PS