Rackable Systems S3116-NAS Getting Started Manual - 4 Additional Documentation
NAS-GettingStarted-1.0.1
Sept. 16, 2004
Page 4 of 4
• Log in to the Web-based NAS Management GUI as username "admin" password "hello".
• In the System/Networking tab of the Web GUI, change the networking configuration to suit your
network/IP addressing requirements. You can now attach the Ethernet connection from the NAS
system to your network.
Your Rackable Systems NAS appliance should now be on your network. It is now time to create and
export storage shares so that your hosts can start to access the storage:
• Log back into the NAS Management GUI using the new IP address (https using port 20001).
• In the System/Storage Pool tab, create storage pool “pool0” for the first 3Ware partition and
“pool1” for the second.
• In the Shares tab, create a new share, say “export0” for storage pool “pool0”. Enable NFS for
Linux/Unix clients and/or CIFS for Windows clients. Permissions are set up in the subsequent
tabs underneath the share tab. Create another new share, say “export1” for storage pool “pool1”.
You should now be able to access the shares.
• Please change the password from “hello” to a new password. Also, log in via ssh into the NAS
appliance command line interface as username “root” with password “hello” and change the root
password for the server with the command “passwd”.
• Hardware RAID management is available under the Status/RAID Information tab. This will pop up
the 3Ware RAID Card Management GUI in a new window. The administrative password defaults
to “3ware”. Please change this. You may want to reuse the same password as for the main NAS
Management GUI.
4 Additional Documentation
For more in-depth documentation, please consult the following:
• S3116 User’s Manual: Hardware, installation, and other important S3116 system information
• MVD NAS Admin Guide: NAS software documentation
• MVD NAS Release Notes: Late-breaking release notes for the NAS software
5 Contacting Rackable Systems
Rackable Corporate Headquarters:
Rackable Systems, Inc.
1933 Milmont Dr.
Milpitas, CA 95035 USA
Tel: +1.408.321.0290
Fax: +1.408.321.0293
Email:
sales@rackable.com (General Information)
support@rackable.com (Technical Support)
Web Site:
http://www.rackable.com