Rackable Systems S3118 User Manual - 1 Introduction
1 Introduction
1.1 Overview
Figure 1: S3118 Storage Server
The Rackable Systems S3118 server (figure 1) is a high-end, 3U rack mount storage server featuring
some of the most advanced technology currently available. It is designed with today's most state-of-the-
art features:
• Available as a complete Network-Attached Storage (NAS) server appliance, an iSCSI block
storage appliance, or as a standard Linux or Windows file/application server.
• Single and dual processor configurations available based on Xeon EM64T, Opteron, and Pentium
4 platforms.
• Support for up to 18 swappable Serial ATA or U320 SCSI hard drives for high-density
deployments (including two rear-accessible, swappable drives that can either be used as mirrored
boot OS drives or as integral parts of the main RAID sets)
• Hard drive carriers designed for minimizing rotational vibration effects. Drive power and activity
LEDs are provided on each carrier.
• 550W 1+1 redundant, hot-swappable, auto-selecting power supply using two standard EIC
Adapter plugs. One of the two supplies must be operational for the server to receive adequate
power.
• Innovative thermal design utilizing four hot-swappable system fans. The system design assures a
uniform and adequate flow of cooling air to be drawn over the entire motherboard, hard drive,
memory and CPU area at all times.
• Front I/O panel, providing LCD display, CD-ROM, power on/off button; power, hard drive activity
and management/fault LEDs; an RJ45 serial remote management port.
• Rear I/O panel, providing motherboard I/O ports for keyboard, mouse, video, Ethernet, USB, and
serial connectivity.
• Optional floppy drive accessible at the rear of the system.
1.2 Server
Components
In addition to the Rackable Systems S3118 chassis, the server contains a variety of hardware
components, including:
• One (1) server-class motherboard
• Two (2) Intel Xeon EM64T, Two (2) AMD Opteron, or one (1) Intel Pentium 4 processor
• Up to 4-32 GB Registered ECC main memory (maximum memory is motherboard dependant)
• Up to Eighteen (18) Serial ATA (SATA) or U320 SCSI hard drives
• Up to Two (2) SATA RAID cards (by Adaptec or 3Ware) or up to Two (2) U320 SCSI RAID cards
(by Adaptec or LSI Logic)
• One (1) Rackable Systems S3118 manual
The following additional options are available:
• One (1) slim CD-ROM drive
• One (1) Floppy drive
• One (1) Remote management card and LCD
• Up to Two (2) additional PCI cards (e.g. additional networking cards)
S3118-Manual-1.0.1
June 30, 2005
Page 3 of 15