Rackit MRS-815 Installer/user Manual - About The Power Supply
14
About the Power Supply
The MRS-815 Rack-Mount
Flat Panel Console w/KVM
Switch utilizes a built-in
40-watt AC power adapter.
Plug the female end of the
MRS-815 cable into the AC
jack at the rear of the case (A).
Plug the male end of the cable
into an available power
socket (B).
Warning! To reduce the risk of injury:
• Do not use the unit near water.
• Do not place the unit on an unstable cart, stand or table.
If the unit falls, it could injure a person or cause
serious damage to the unit.
• Do not overload power outlets or extension cords. An overload
can result in fire or electric shock.
• Do not use an extension cord unless absolutely necessary.
Using an improper extension cord could result in a risk of fire
and electric shock. If an extension cord must be used, make
sure:
– The pins on the extension cord’s plug are of the same number,
size, and shape as those of the plug on the power supply.
– The extension cord is properly wired and in good electrical
condition.
– The extension cord’s wire is at least 18 AWG.
• Do not disassemble the unit. Take the unit to a qualified
service technician when service or repair is required.
Improper reassembly may result in a risk of electric shock or
fire.
A
B