RAD B-RAD 1400 User Manual - General Instructions
Version 1.0 - June 2015
3
User manual B-RAD
1.
General instructions
2. Assembly
NOTE:
Do not operate the tool before reading these instructions. If breakdown, malfunction or damage
occurs, do not attempt to repair, please contact RAD Torque Systems B.V. immediately.
RAD battery torque wrenches are reversible, non-impacting, torque controlled tightening tools and must
always be operated with the following:
• Fully charged battery
• Impact sockets with locking pin and o-ring
• Proper reaction arm with retaining ring.
1. Make sure the battery is fully charged
2. Slide in the battery pack until it engages
3. Fasten and secure the reaction arm on the jagged side of the gearbox with the retaining ring
Rotational direction switch
B-RAD torque wrench
Setting torque
NOTE:
These torque wrenches contain metal components that can be dangerous in hazardous areas.
Tool trigger
Battery release button
Lithium-ion battery
Figure 2