Rad2Go ZZ CRUISER E-023 User Manual

Summary of ZZ CRUISER E-023

  • Page 1

    Zz cruiser e – 023 user manual.

  • Page 2: Instruction

    Jet usa instruction 1. To prolong motor life, push start the scooter before applying power. 2. Power handle returns to ‘off’ when released. 3. Release power handle before applying brake. Do not apply power when brake is on. 4. Charge battery and discharge at lease once every 90 days. 5. Check tire p...

  • Page 3

    Jet usa important charger and battery safety instructions charging instructions 1. Lay scooter flat with on/off switch in ‘off’ position. 2. Plug charger cord into scooter first, then plug into 110v, 120v, 220v, or 240v outlet. 3. Charge for 6-8 hours. The led will be red during charging and when fu...

  • Page 4

    Jet usa entire scooter take out scooter from cartons 3.

  • Page 5: E-023 General

    Jet usa e-023 general connection diagram wiring diagram + - - controller red battery charger + + - + - yellow black green red black red brown black red green brake switch motor power indicator speed controller power switch black red 24v9ah battery 4.

  • Page 6

    Jet usa basic functions and specifications material: fiber glass deck and steel body dimensions: 33 × 22.86 × 106 cm gross weight: 21.09 kgs net weight: 18.33 kgs maximum speed: 19.31 kmh average tralvel distance: 17.7 kms power-driven max.Load capacity: 90.72 kgs after every charging: to travel for...

  • Page 7

    Jet usa safety lever quick release lever unfold the zz cruiser 1. Lift the quick release lever and push down the safety lever. 2. To unfold the handlebar column grasp it in the middle and raise it to an upright position. (to uplift the safety lever to make sure it’s at the right position) 3. Push th...

  • Page 8

    Jet usa 1. Set handlebar upright and secure 2. Press the spring button and insert handles spring button holes in the t shaped handlebar. 3. Ensure speed control on right, brake on left. Press the clip adjust up and down 7.

  • Page 9: Maintenance

    Jet usa maintenance 1. Inspect the entire scooter before each use; check the brake, speed control, belt and wheels, including tire pressure. 2. If you hear any unusual noise, stop and check the motor and do not operate if improper noises. 3. Clean the scooter regularly and avoid long hot sun exposur...