Rad2Go ZZ CRUISER E-023 User Manual - page 3
JET USA
IMPORTANT CHARGER AND BATTERY SAFETY
INSTRUCTIONS CHARGING INSTRUCTIONS
1. Lay scooter flat with on/off switch in ‘off’ position.
2.
Plug charger cord into scooter first, then plug into 110V, 120V, 220V,
or 240V outlet.
3.
Charge for 6-8 hours. The LED will be red during charging and when
fully charged, the LED will turn green.
4.
Do not overcharge, unplug unit after 8 hours to avoid overheating risks.
5.
Charge unit after low charge warning and every 90 days.
BATTERY INSTRUCTIONS
1. Change the battery if any leaks, breaks or cracks appear.
2.
Do not touch the battery liquid solution, flush with water if contact is
made.
3.
Dispose of battery according to state and local laws.
Accelerator
Rear brake
Deck
Batteries
Front Wheel
Power switch & Power indicate light
Kick stand
2