Radeum FreeLinc Adapter Series User Manual - Adapter Indicator Lights
Adapter Indicator Lights
The indicator light on your FreeMotion 200 adapter
indicates wireless communication status as follows:
General Operation
Using Your Headset for the First Time
Step One: Attach Adapter
Fit adapter to the accessory interface of the portable
radio (see your portable radio’s user manual if you
need assistance locating the accessory interface). If
your adapter has a mounting clip on top, this will fit
into a corresponding notch on top of your portable
radio. If your adapter does not have a mounting clip,
use the set screw (see diagram) to secure it to your
radio. When properly attached, the spring-loaded
pins should align with the contacts on the accessory
interface of your portable radio and adapter should fit
securely.
Step Two: Turn On Adapter
Turn on your portable radio and set toggle switch to
“On” position. (see diagram) Note that this will auto-
LED BEHAVIOR
INDICATION
Red, Flashing 2x per second
Seek mode
Green, Solid
Mate found, pairing/linking in
progress
Green, Flashing 2x per second
Link active
Orange, Flashing 2x per second
VOX mode active
LED not illuminated
Sleep mode
matically silence the speaker on your portable radio and
route all communications to the headset.
For information on how to operate this product in
conjunction with a FreeLinc communications accessory,
please refer to the user manual that came with the acces-
sory.
Tips and Suggestions
To learn more about Magnetic Induction Technology,
please visit the Aura Communications Web site at http://
www.auracomm.com.
Troubleshooting
For up-to-date troubleshooting information, to get help
with a specific problem, or to contact a customer service
representative, please visit www.freelinc.com, and click
the “support” link or call 1-866-467-1199.