Radeum FreeMic 200 User Manual - General Operation
General Operation
Using Your FreeMic for the First
Time
Step One: Charge FreeMic Battery
Plug the FreeMic into an electrical socket using
the included wall charger. Please refer to the
diagram on page 11 for the location of the wall
charger connection on the FreeMic.
Step Two: Attach Adapter
Fit adapter to the accessory interface of the
portable radio (see your portable radio’s user
manual if you need assistance locating the ac-
cessory interface). If your adapter has a mount-
ing clip on top, this will fit into a corresponding
notch on top of your portable radio. If your
adapter does not have a mounting clip, use the
set screw (see diagram) to secure it to your radio.
When properly attached, the spring-loaded pins
should align with the contacts on the accessory
interface of your portable radio and adapter
should fit securely.
Step Three: Turn On Adapter
Turn on your portable radio and set toggle
switch on your FreeLinc adapter to “On” position.
(see diagram) Note that this will automatically
silence the speaker on your portable radio and
route all communications to the FreeMic.
Step Four: Exit Sleep Mode
Your FreeMic will be in Sleep Mode when you
unplug it from the charger. To awaken your
FreeMic from Sleep Mode, depress the PTT but-
ton once and hold it for one second. Once you
have awakened your FreeMic from Sleep Mode,
it automatically enters Seek Mode (see defini-
tion above).
Step Five: Pair FreeMic to Adapter
When you take your FreeMic out of the box for
the first time, you will need to pair it with an
adapter manually. To initiate manual pairing,
hold the FreeMic close to the adapter and simul-