True to the music www.Radialeng.Com ® true to the music ® user guide shuttle ™ 500 inser t and routing 500 series module www.Radialeng.Com radial engineering ltd. 1588 kebet way, port coquitlam british columbia, canada, v3c 5m5 tel: 604-942-1001 • fax: 604-942-1010 email: info@radialeng.Com.
Radial engineering ltd. Shuttle™ 500 module true to the music ® radial ® shuttle ™ 500 user guide table of contents ......................................................Page feature set .................................................................... 1 overview ....................................
True to the music ® radial engineering ltd. Shuttle™ 500 module 1 4 3 2 6 5 rear panel 1 feature set 1. Loop-1 insert switch: inserts the balanced loop into the signal path to compare pre and post signals. Works with all 500 series modules and racks. 2. Loop-1 send & receive jacks: line- level +4db ...
Radial engineering ltd. Shuttle™ 500 module true to the music ® 2 overview the radial shuttle is a patch point module that enables you to bring signals in and out of the radial workhorse and other 500 series modules. Think of it as a convenience device. In other words, it enables you to perform a nu...
True to the music ® radial engineering ltd. Shuttle™ 500 module 3 getting started before making any connections, start by turning off your audio system and turning all volume levels down. This helps protect equipment from turn-on transients that could damage loudspeakers and other sensitive equipmen...
Radial engineering ltd. Shuttle™ 500 module true to the music ® 4 using the loops the shuttle can be used in any standard 500 series rack. There are some added features that workhorse users can enjoy. The easiest way to discover the shuttle’s functionality is to go right to applications. This way, y...
True to the music ® radial engineering ltd. Shuttle™ 500 module 5 unbalanced patch point for those equipped with a workhorse 500 series rack, a second loop is available via front panel ¼” unbalanced send and receive jacks. The most common method of routing effects in the studio is via an unbalanced ...
Radial engineering ltd. Shuttle™ 500 module true to the music ® 6 omniport insert patch point for those equipped with a workhorse, a third loop is available via the omniport connector. This ¼” trs connector follows the standard tip-send, ring-return and is ideally suited for routing signals to a fav...
True to the music ® radial engineering ltd. Shuttle™ 500 module 7 as soon as you plug in your module, the feed function will route the signal through the shuttle, onto the workhorse internal buss and into the mixer section. This enables the engineer to take full advantage of the workhorse mixer with...
Radial engineering ltd. Shuttle™ 500 module true to the music ® 8 patching external sources the shuttle’s two front panel loops are capable of being used as secondary (alternate) inputs to enable line-level sources such as keyboards, cd players, dj mixers or drum machines to easily connect to the wo...
True to the music ® radial engineering ltd. Shuttle™ 500 module block diagram* shuttle 500 module specifications* * subject to change without notice. 9 connector wiring ground hot (+) cold (-) ground trs ¼” phone connector hot (+) ts ¼” phone connector 1 2 3 hot (+) cold (-) xlr connector ground cli...
® www.Radialeng.Com true to the music three year transferable limited warranty radial engineering ltd. (“radial”) warrants this product to be free from defects in material and workmanship and will remedy any such defects free of charge according to the terms of this warranty. Radial will repair or r...
