Radiant Communications DL221 User Manual

Other manuals for DL221: User Manual

Summary of DL221

  • Page 1

    Series dl221 10/100 ethernet transceiver user manual radiant communications corporation p.O. Box 867 • 5001 hadley road • south plainfield, nj 07080 800.969.3427 • fax 908.757.7666 e-mail: sales@rccfiber.Com • www.Rccfiber.Com radiant communications corp. Dl221 rev b4.3 7/04 1.

  • Page 2: Rev B4.3

    Ethernet 10/100 transceiver series dl221/dl221a rev b4.3 for ac input front panel indicators – power – on when unit has power 100m – on when twisted pair is working at 100mbs off when twisted pair is working at 10mbs link fx – on when fiber optic link present tp – on when twisted pair link present f...

  • Page 3

    Mode setup note - switch 4 must be in the on/up position for unit to operate. After configuration of unit power must be reset. This can be done by removing power to unit or toggle switch 4 down then up. Settings- auto-negotiation - sw 1, sw 2, sw 3 down/off 10m half duplex - sw 1 up/on, sw 2, sw 3 d...

  • Page 4

    For 5vdc input front panel indicators – rwr – on when unit has power r – on when twisted pair is working at 100mbs off when twisted pair is working at 10mbs l – on when fiber optic link present a – on when twisted pair link present fx tx fdx – full duplex. Lit when fiber optic link and twisted pair ...

  • Page 5

    Settings- auto-negotiation - sw 1, sw 2, sw 3 down/off 10m half duplex - sw 1 up/on, sw 2, sw 3 down/off 10m full duplex - sw 1 up/on, sw 2 down/off, sw 3 up/on 100m half duplex - sw 1 up/on, sw 2 up/on, sw 3 down/off 100m full duplex - sw 1 up/on, sw 2 up/on, sw 3 up/on note- after configuration of...

  • Page 6

    Specifications standard compliance: ieee802.3u, 100basetx, 100basefx, 10baset 100basetx port: rj-45 connector half/full duplex support via auto-negotiation or manual 100m over utp/stp 100 ohm cat.5 cable auto-polarity correction mdi-ii/mdi-x selection 10baset (switch selected) 100basefx port: 1300nm...

  • Page 7

    Part number description atten. Max. Distance dl221-xyz transceiver, multimode, 2 fibers 9db 6km dl221/sm-xyz transceiver, singlemode, 2 fibers 9db 25km dl221/smhp-xyz transceiver, singlemode , 2 fibers 18db 50km dl221/smsp-xyz transceiver, singlemode, 2 fibers 28db 80km dl221/smup-xy5 transceiver, s...