Radiforce MX241W User Manual - page 17

1

Chapter 2  Adjusting Screen

4

  Perform advanced adjustments for the following using the menu of 

the .

Adjust the clock, phase and position, in this order.

●

  To eliminate vertical bars [Clock]

Procedure

Choose from the menu, and press 

.

Adjust the clock with 

 or 

.

Press 

 slowly so as not to miss the adjustment point.

Press   to exit the adjustment.

When blurring, flickering or bars appear on the screen after adjustment, proceed to [Phase] to remove flickering 

or blurring.

●

  Remove flickering or blurring [Phase]

Procedure

Choose from the menu, and press 

.

Adjust the phase with 

 or 

.

Press 

 to exit the adjustment.

Attention

Flickering or blurring may not be eliminated depending on your PC or graphics board.

•

●

  To correct screen position [Hor.Position] [Ver.Position]

NOTE

Since the number of pixels and the pixel positions are fixed on the LCD monitor, only one position is provided to 

display images correctly. The position adjustment is made to shift an image to the correct position.

•

Procedure

Choose or from the menu, and press 

.

Adjust the position with 

 or 

.

Press 

 to exit the adjustment.

1.

2.

3.

1.

2.

3.

1.

2.

3.