Radiforce MX241W User Manual - page 43
Chapter 6 Reference
HDCP (High-bandwidth Digital Contents Protection)
Digital signal coding system developed to copy-protect the digital contents, such as video, music, etc.
This helps to transmit the digital contents safely by coding the digital contents sent via DVI terminal on
the output side and decoding them on the input side. Any digital contents cannot be reproduced if both of
the equipments on the output and input sides are not applicable to HDCP system.
Phase
Phase means the sampling timing to convert the analog input signal to a digital signal. Phase adjustment
is made to adjust the timing. It is recommended that phase adjustment be made after the clock is adjusted
correctly.
Range Adjustment
Range adjustment controls the signal output levels to display every color gradation. It is recommended
that range adjustment be made before color adjustment.
Resolution
The LCD panel consists of numerous pixels of specified size, which are illuminated to form images. This
monitor consists of 1920 horizontal pixels and 1200 vertical pixels. At a resolution of 1920 x 1200, all
pixels are illuminated as a full screen (1:1).
Temperature
Color temperature is a method to measure the white color tone, generally indicated in degrees Kelvin.
The screen becomes reddish at a low temperature, and bluish at a high temperature, like the flame
temperature.
5000K: Slightly reddish white
6500K: Warm white like paper white
9300K: Slightly bluish white
TMDS (Transition Minimized Differential Signaling)
A signal transmission system for digital interface.
VESA DPMS (Video Electronics Standards Association - Display Power Management
Signaling)
VESA provides the standardization of signals from PC (graphics board) for power saving of PC monitors.
DPMS defines the signal status between PC and monitor.