Radiforce RX440 Instructions For Use Manual - No Picture
6
No picture
If a problem still remains after applying the suggested remedies, contact your local EIZO representative.
Problem
Possible cause and remedy
1. No picture
• Powerindicatordoesnotlight.
• Checkwhetherthepowercordisconnectedproperly.
• Turnthemainpowerswitchon.
• Press .
• Turnoffthemainpower,andthenturnitonagainafew
minuteslater.
• Powerindicatorislightinggreen.
• Increase“Brightness”,“Contrast”,or“Gain”inthe
Adjustmentmenu.
• Turnoffthemainpower,andthenturnitonagain.
• Powerindicatorislightingorange.
• Switchtheinputsignal.Fordetails,refertotheUser’s
Manual(ontheCD-ROM).
• Operatethemouseorkeyboard.
• CheckwhetherthePCisturnedon.
• WhenPresenceSensorissetto“Auto”or“Manual”,the
monitormayhaveshiftedtothepowersavingmode.
Comeneartothemonitor.
• Turnoffthemainpower,andthenturnitonagain.
• Powerindicatorflashesorangeandgreen.
• ThereisaprobleminthedevicethatusesDisplayPort
connection.Solvetheproblem,turnoffthemonitor,and
thenturnitonagain.Refertotheuser’smanualofthe
devicethatusesDisplayPortconnectionfordetails.
2. The message below appears.
Thismessageappearswhenthesignalisnotinputcorrectly
evenwhenthemonitorfunctionsproperly.
• Thismessageappearswhennosignalis
input.
Example:
• Themessageshownleftmayappear,becausesomePCs
donotoutputthesignalsoonafterpower-on.
• CheckwhetherthePCisturnedon.
• Checkwhetherthesignalcableisconnectedproperly.
• Switchtheinputsignal.Fordetails,refertotheUser’s
Manual(ontheCD-ROM).
• Themessageshowsthattheinputsignalis
outofthespecifiedfrequencyrange.
Example:
fD:DotClock
fH:HorizontalScanFrequency
fV:Verticalscanfrequency
• CheckwhetherthePCisconfiguredtomeettheresolution
andverticalscanfrequencyrequirementsofthemonitor
(see“CompatibleResolutions”).
• RebootthePC.
• Selectanappropriatedisplaymodeusingthegraphics
board’sutility.Refertothemanualofthegraphicsboard
fordetails.