RADIKAL TECHNOLOGIES SAC-2.2 Manual - page 19
19
The Cursor and Zoom functions
F7
-
Calls up Screenset 7
Shift
Opens/closes the Transport window
EQ
Calls up Frequency/Gain on multiple tracks
Send
Calls up Destination/Level on multiple tracks
Marker
Jumps to the seventh Marker position
F8
-
Enter on the topmost window
Shift
Opens/closes the Audio window
Track
Calls up Track Setup on multiple tracks
EQ
Calls up Frequency/Gain on multiple tracks
Send
Calls up Destination/Level on multiple tracks
Marker
Jumps to the eighth Marker position
Cursor and Jog-Wheel Functions
The cursor keys of Logic Control are replaced on the SAC-2K and SAC-2.2 by
the first two Encoder under the third display. This way you can quickly dial in
extreme zoom-settings more efficiently than with repeated button presses. The
Zoom enable button is on the push-button of the third Encoder. The display shows
at any time whether the Zoom shot mode is active or not.
Element
Modifier
Button
Function
Encoder 1 -
Cursor up/down
In the "Channel Strip EQ", "Send" or "Plugin/Instrument-Editor"
mode.
-
Calls up the next EQ bands or the next Insert
Slots
Otherwise... (however, always in the Nudge mode)
Encoder steers the vertical cursor keys of the
computers keyboard.
In the "Zoom" Mode:
-
Verticle Zoom setting change
Shift
Momentarily suspends the Zoom function and
can be used to select tracks