Radio Shack 1400214 User Manual - Operating The Recorder
8
Operating the Recorder
Make a Recording
1.
Prepare the recording source:
•
Built-in microphone
— Place the recorder within 4 inches
(10cm) of the sound source.
•
External microphone
— Insert a microphone plug into
the
MIC
jack.
•
Audio source
— Connect an audio source to the
AUX-IN
jack (refer to “
Make an AUX Recording
” on page 9).
2.
If necessary, press
MODE
to enter voice mode.
VOICE
appears.
•
Recorder settings
— Refer to “
Setting the Recorder
“ on
page 6 to make the necessary settings.
•
VOX recording
— Set
VOX
to
ON
.
VOX
appears. This records only
when there is sound. Refer to “
Set
Recording Sensitivity
“ on page 6 to set
the VOX sensitivity. The higher the
VOX sensitivity, the lower the sound
level is needed to start recording.
•
Choosing a folder
— Press
FILE
to choose a folder (F1,
F2, F3, F4) to keep the voice message.
3.
Press
REC
. When the
REC
indicator lights, speak into the
MIC
.
When
VOX
is on, if there is no sound, recording pauses with
PAUSE
fl ashing. When there is sound, recording resumes.
4.
Press
STOP
to stop recording. The message is saved.
• A recorded message is saved as a serial number (01-99)
with the recording mode indicator
SP
,
MP
or
HP
.
• To remove the message, press
ERASE
twice (refer to
“
Erase Files
” on page 10).
• If no space is available in the folder,
FULL
displays.