Radio Shack 42-6013 Owner's Manual - Operation
8
Operation
ˆ
Operation
LISTENING TO THE
RADIO
1. Repeatedly press
TUNER ON/
BAND
until the desired band (
7C
7C
7C
7C
,
, , or ) appears. 2. Rotate VOL to a comfortable lis- tening level. 3. Use manual, automatic, or mem- ory tuning to tune to the desired station. The display shows the tuned frequency. • Manual Tuning — Repeat- edly press or hold down – TUNING + to tune up or down to the selected station. • Automatic Tuning — Hold down – TUNING + for about two seconds or until the tuner starts tuning, then quickly release it. The CD player stops at the next station with a strong signal. • Memory Tuning — Press one of the five memory buttons ( P1 through P5 ) to directly select a preset station. You can preset up to 20 stations. See “Storing a Radio Station in Memory”. Notes: • The CD player has a built-in AM antenna. For the best AM recep- tion, move or rotate the CD player until the clearest reception is received. • The supplied headphones, optional earphones’ cord, or optional Y-cable serve as an FM antenna. For the best FM recep- tion, fully uncoil the cord. • When listening to an FM station, press STEREO/MONO . IJ IJ IJ IJ appears. If reception is poor or noisy, press STEREO/MONO again. CEDE CEDE CEDE CEDE appears. The sound is not in stereo, but reception should improve. 4. Press STOP/TUNER OFF to turn off the radio. STORING A RADIO STATION IN MEMORY You can store up to 20 stations (15 FM and 5 AM) in memory — 5 each in AM, FM1, FM2, and FM3 — so that you can immediately tune to a station at the press of a button. 1. Turn on the radio and tune to the desired band and station.