Radio Shack CD Graphics Karaoke System Owner's Manual - page 11
11
to open the compartment door and
remove the CD/CDG.
To stop a tape, press
STOP/EJECT
on the deck. Press
STOP/EJECT
again to open the compartment door
and remove the cassette tape.
9. Set the microphone's
ON/OFF
switch
to
OFF
, then press
POWER
to turn off
the system.
USING THE KARAOKE
SYSTEM WITH AN
OPTIONAL AUDIO
COMPONENT
If you connected an optional audio com-
ponent (see “Connecting an Audio Com-
ponent” on Page 6), follow these steps
to hear the music from that component,
or to hear your voice with the music.
1. Set
FUNCTION SELECT
to
AUX
.
2. Press
POWER
to turn on the system.
The POWER indicator lights.
3. Turn on the audio component.
4. Rotate
ECHO
and
MASTER VOLUME
to the desired levels.
5. To hear your voice with the music,
set the microphone's
ON/OFF
switch
to
ON
. Rotate
MIC VOLUME
to adjust
your voice's volume.
6. When you finish, set the micro-
phone's
ON/OFF
switch to
OFF
.
Press
POWER
to turn off the system,
then turn off the audio component.
RECORDING YOUR VOICE
WITH MUSIC
Follow these steps to make a recording
of your voice with music from the sys-
tem’s CD/CDG or an optional audio
component.
1. Load a blank audio cassette (or one
you want to record over) in the
cassette deck (see “Cassette Deck
Operation” on Page 9).
2. Follow Steps 1–6 in “CD/CDG
Player Operation” on Page 7 or
Steps 1–6 in “Using the Karaoke
System with an Optional Audio
Component” on Page 11.
3. Set
FUNCTION SELECT
to
CD+G
for
a CD/CDG or
AUX
for an optional
audio component.
4. To record your voice with a CD/
CDG, repeatedly press
SKIP/
SEARCH
or
until the
desired track number appears.
To record your voice with music
from an optional audio component,
turn on the optional component.
5. Press
PLAY/PAUSE
, then press both
RECORD
and
PLAY
on the cassette
deck at the same time. The tape
deck records your voice along with
the sound from the CD/CDG or the
optional audio component.