Radio Shack CD Graphics Karaoke System Owner's Manual - Cassette Deck Operation
9
Note: The 21st track you program
replaces the first stored track, and
each additional track you program
replaces the next successive track.
6. Press
PLAY/PAUSE
to play the
stored tracks. The first stored track
number appears.
7. Program play automatically stops at
the end of the last programmed
track. To stop play sooner, press
STOP
.
Note: You can use intro scan during
program play.
Reviewing/Replacing a
Programmed Sequence
While play is stopped, repeatedly press
PROGRAM
to review the programmed
sequence.
To replace a programmed track, press
PROGRAM
until the track you want to re-
place appears. Press
SKIP/SEARCH
or
to select the desired track,
then press
PROGRAM
to store the track.
Erasing a Programmed
Sequence
To erase a programmed sequence,
press
PUSH OPEN
before or after pro-
grammed play, or press
POWER
.
ˆ
Cassette Deck Operation
1. Press
STOP/EJECT
to open the
cassette compartment door.
2. Insert a cassette with the exposed
tape down and the desired side fac-
ing you. Avoid touching the tape.
3. Close the cassette compartment
door and press the center or right
portion of the door until it clicks shut.
4. Press
POWER
on.
5. Slide
FUNCTION SELECT
to
TAPE
.
POWER
FUNCTION
SELECT
RECORD
PLAY
REWIND
F/FWD.
STOP/
EJECT
PAUSE