Radio Shack Keychain Quick Manual - page 2
2
3. Replace the cover.
4. Plug the transceiver into a standard
AC outlet, then fully extend the
transceiver's antenna. Plug the lamp
or appliance into the transceiver. If
you plug the transceiver into a
switched outlet, turn the switch on.
When a lamp or appliance does not reli-
ably respond to the remote’s com-
mand, replace the batteries.
Warning: Dispose of old batteries
promptly and properly. Do not burn or
bury them.
Caution: If you do not plan to use the
remote switch for several weeks, re-
move the batteries. Batteries can leak
chemicals that can destroy electronic
parts.
OPERATION
Button 1 on the remote always controls
the lamp/appliance connected to the
transceiver. Button 1 or 2 controls other
optional modules in addition to this
transceiver if you set the unit code for
those modules to either 1, 2, 5, or 6.
For other modules with unit codes set to
1 or 2, press Button 1. For modules set
to unit codes 5 or 6, press Button 2.
Button 1
Button 2
61-2663.fm Page 2 Wednesday, August 11, 1999 5:05 PM