Radio Shack PRO-404 User Manual - Understanding Your Scanner
4
Fe
at
ur
es
Fe
at
ur
es
KeyLock– lock the scanner’s keys to help prevent
accidentally changing the scanner’s programming.
Liquid-CrystalDisplay–easy to view and change
programming information.
FlexibleAntennawithBNCConnector–provides
good reception of strong local signals. You can also
connect an external antenna for improved reception of
distant or weak signals.
ThreePowerOptions– power the scanner using
batteries (rechargeable or non-rechargeable), external
AC power (using an AC adapter, not supplied), or DC
power (using a DC adapter, not supplied).
YourPRO-404scannercanreceivethesebands:
FrequencyRange
TypesofTransmissions
29–54 MHz
10-Meter Ham, VHF Lo,
6-Meter Ham
108–136.9875 MHz
Aircraft
137–174 MHz
Military Land Mobile, 2-
Meter Ham, VHF Hi
380–512 MHz
UHF Aircraft, Federal
Government, 70-cm Ham,
UHF Standard, UHF “T”
Note: See “Specifications” on page
37 for more
information about frequency steps.
Understanding Your Scanner
Once you understand a few simple terms used in this
manual and familiarize yourself with your scanner’s
features, you can put the scanner to work for you.
Simply determine the type of communications you want
to receive, then set the scanner to scan them.
A frequency is the receiving signal location (expressed
in kHz or MHz). To find active frequencies, use the
search function or consult an online resource such
as www.radioreference.com. You can also search the
ServiceBanks, which are preset groups of frequencies
categorized by type of service.
When you find a frequency, you can store it into a
programmable memory location called a channel,
Features
Your new PRO-404 Handheld Scanner lets you scan
conventional transmissions and is preprogrammed with
search banks of the most common frequencies used
by public service agencies. Service Banks are accessed
by pressing a one-touch search key—no complicated
programming required.
Your new scanner gives you direct access to over 25,000
frequencies, including those used by police and fire
departments, ambulance services, aircraft, and amateur
radio services.
YourPRO-404scanneralsohasthesespecial
features:
SignalStalkerII–a powerful tool to rapidly detect,
monitor, and store frequencies from nearby radio
transmissions.
ServiceBanks– easily locate types of calls by searching
preprogrammed frequencies in separate marine, fire/
police, aircraft, ham, and weather banks.
DisplayBacklight– makes the display easy to read in
low-light situations.
Lock-outFunction– skip over specified channels or
frequencies when scanning or searching.
TenChannel-StorageBanks– group and store 20
channels in each bank (200 total channels).
Tune– tune to new and unlisted frequencies starting
from a specified frequency.
SAME/FIPSWeatherAlert– displays the weather
event and sounds an alert for the specific cities or
counties you choose.
MemoryBackup–frequencies remain stored in
memory for an extended time even without batteries.
ScanDelay– delays scanning for two seconds before
moving to another channel in order to hear replies.
PriorityChannel– set the scanner to check one
channel every two seconds while scanning.
DataCloning– transfer the programmed data to
another PRO-404 scanner.