1. DL manuals
  2. Radio Thermostat
  3. Thermostat
  4. CT100
  5. Operation Manual

Radio Thermostat CT100 Operation Manual

Other manuals for CT100: Operation Manual, User Manual
Manual is about: communicating touch screen thermostat

Summary of CT100

  • Page 1

    Pg 1 operation guide ct100 the ct100 communicating z-wave thermostat operates via a high-quality, easy-to-use touch screen. To set or adjust your ct100, simply touch your finger firmly to the screen. The screen will automatically light up and you will hear a “beep.” do not use a sharp or metallic de...

  • Page 2: Home Screen

    Pg 2 control screens home screen before you operate the ct100 please get familiar with these basic control screens. All the ct100 functions are accessed through these screens: home, menu, and manual. The ct100 touch screen technology allows you to select (by touching) an item and change it using the...

  • Page 3: Menu Screen

    Pg 2 pg 3 menu screen the menu screen is the gateway to many functions or settings of the ct100. It is displayed when you press the menu button. [see pages 6-8 for details] 1 set time touch this area to set the time of day left arrow goes back, right arrow goes forward calibration control use this t...

  • Page 4: Manual Screen

    Pg 4 manual screen the manual screen control screen is where you can make temporary changes to your ct100’s operation. From the home screen, touch the main temperature display to use this screen. [see page 9 for details] f emer heat target temperature room temperature return home temp up / temp down...

  • Page 5

    Pg 4 pg 5 initial settings press menu to access the following commands (from home screen). Set time of day touch the time of day arrows to move the time selection forward or backward until it displays the current time. Touch and hold for faster setting. Set of-oc display touch the of and it will tog...

  • Page 6

    Pg 6 menu screen functions press menu to bring up menu screen. Time of day touch the left (down) or right (up) arrows next to the time display to set the current time (1 minute per touch). Touch and hold the arrow for fast time set (15 minute jumps). Swing (hvac cycling rate) this feature allows you...

  • Page 7

    Pg 6 pg 7 chirp set - touch this to turn the audible chirp sound on or off. F c set - touch this to switch the temperature display scale from of to oc . Lock (the ct100 has 2 lock modes) touch icon for 5 seconds; the unit will go into the partial lock mode. The user can temporarily override the ct10...

  • Page 8: Calibrate

    Pg 8 calibrate your thermostat was accurately calibrated at the factory to ±1° f of actual ambient temperature. You do have the option, however, to change the display temperature to match that of a previous thermostat, or to match another thermostat already in your home. The range of change is from ...

  • Page 9

    Pg 8 pg 9 manual screen functions the ct100 has 2 manual override commands. The manual screen is accessed by touching the large current temperature display in the middle of the home screen. Important: the mode must be in heat, cool, or auto to access the manual screen. Temperature touch the +/- arro...

  • Page 10

    Pg 10 other functions mode button the mode button sets the ct100 to heat, cool, auto, or off modes. Press it once to step to the next mode. If the ct100 is in off and you want to return to the mode you were previously in, touch the off indicator on screen. Fan button the fan control is normally in a...