Radionics D279A Operation And Installation Manual - D279A
D279A Operation & Installation Manual
Copyright © 2000 Radionics
Page 5
46456B
D279A
Introduction
1.0
Introduction
1.1
Manual Organization
This manual is divided up into five sections, which are summarized in the table below.
Section
Description
1
Introduction
2
Overview provides an overview of the D279A, including operational specifications.
3
Installation provides installation instructions
4
Operation provides operational instructions
5
Programming provides programming instructions
Table 1: D279A Independent Zone Control Operation and Installation Guide Organization
1.2
Other Literature Referenced
See the following for a more complete and detailed description of the D279A. They have been included in the table
below with their part number for easy ordering. Contact Radionics if you need to order additional literature.
Name of Literature
Radionics Part
Number
D4112 Installation and Programming Manual .....................................................
73-05365-002
6112:Main Program Entry Guide .........................................................................
74-04367-000
8112:Main Program Entry Guide .........................................................................
74-03762-000
9000 Series Program Entry Guide.......................................................................
74-07695-000
Table 2: Referenced Literature
1.3
Documentation Conventions
1.3.1
Type Styles Used in this Manual
We use special type styles to help you identify the objects that we are describing in this guide.
Bold text
usually indicates selections that you may use while programming your panel. It
may also indicate an important fact that should be noted.
Bold Italicized
used to denote notes, cautions and/or warnings
Italicized text
Is used to reference the user to another part of this manual or another manual
entirely. It is also used to symbolize names for records that the user will create.
Courier Text
Text that appears like this indicates what may appear on the D5200 Programmer
display, command center/keypad or internal printer.
[CAPITALIZED TEXT]
Text like this is used to indicate to the user that a specific key should be pressed.