Rae RAELink3 Quick Reference - User Interface
User Interface
The user interface consists of the display and three “soft” keys: [Y/+], [MODE], and
[N/-]. The LCD display provides visual feedback that includes the reading, time,
battery condition, and other functions.
Controls
Display
Radio
Signal
Strength
Battery
Charge
Y/+ key
N/- key
GPS
Satellite
BT Linked to xxxxxxxx
[Y/+] increases values, [MODE] acts as on/off and save, and [N/-] selects “no” and
advances to next function.
Bluetooth and other status
displayed here
MODE key
In addition to their labeled functions as “yes,” “mode select,” and “no,” [Y/+], [MODE],
and [N/-] act as “soft keys” that control different parameters and make selections within
the instrument’s menus.
Operation
Turn On
Press and hold [MODE] until the display is on.
Turn Off Press and hold the [MODE] for 3 seconds. After a 5-second countdown,
you see “Unit off...” Release your finger.
Backlight: Press any key to turn on backlight. After 15 seconds, it shuts off.
Establish Bluetooth Link
1. Turn on the Bluetooth-enabled monitor. Make sure it is set up to run Bluetooth
(Bluetooth is turned on).
2. Turn on the RAELink3. It should be in Remote Mode, and Bluetooth turned on.
3. *The two units connect, and exchange ID numbers. The ID number of the
monitor is shown below the icons. They are now connected.
*The RAELink3 can scan for Bluetooth-enabled monitors, and stores up to 2 connections in
memory for faster re-deployment. Upon powering on, the RAELink3 automatically searches
for the primary Bluetooth device indicated by the asterisk in memory.
To perform the initial pairing of a detector with RAELink3, scan for a Bluetooth-
enabled monitor: Press and hold [MODE] and [N/-] for 3 seconds. When the “BT
Search” message appears, press [Y/+]. For fastest operation, only turn on one RAELink3
and one monitor at a time during this initial pairing.
Set Network ID
Important! All units in a network must have the same Network ID.
With the RAELink3 turned on, press and hold both [MODE] and [N/-] for 3 seconds.